Equipment Store

Your first port of call for premium marine equipment

Technically engineered products designed, manufactured and distributed for marine and off grid applications.

1
Yes
None
1
99999
/equipment-store/
0 items in cart
or empty cart
Thumbnail
Filter

Categories:

Supplier:

Service Installation Link:

Air Conditioning
Self Contained Marine Air-conditioning Units Image
Split System Marine Air-conditioning Units Image
Chilled Water Plant Marine Air-conditioning Image
Air Treatment
TEAgel Image
Trac Ecological
TEAgel
Gelair Air Conditioning Blocks Image
Gelair Health-e SPLIT Image
Bow Thrusters
QS Seamaster Bow and Stern Thrusters Image
QS Seamaster Bow & Stern Thrusters.
QS Seamaster Bow and Stern Thrusters
Craftsman Bow Thrusters Image
Craftsman Marine
Craftsman Bow Thrusters
ABT TRAC - HYDRAULIC BOW THRUSTERS Image
Integrated Hydraulic Systems Image
Dualis Thruster Range Image
Descalers and Cleaners
Barnacle Buster Concentrate Image
Descaler Concentrate Image
Trac Ecological
Descaler Concentrate
GreenClean Coil Cleaner Image
PSR Image
Trac Ecological
PSR
Sew Clean Image
Trac Ecological
Sew Clean
Hydraulic Swim Platforms
Hydraulic Swim Platforms for Yachts Image
Marine Chairs
Navigator Flybridge Image
Compact Helm Image
Marine Sewage Treatment
Marine Sewage Treatment System Image
Marine Toilets
Luxury Marine Toilets Image
Marine Wipers
Marine Windscreen Wipers Image
Rope Cutters
Rope and Line Cutter Image
Shaft and Rudder Bearings
Shaft and Rudder Bearings Image
Stabilizers
STAB Image
Waveless
STAB
Stabilis Electra - High Speed System Image
Stabilis Electra - Long Range System Image
Hydraulic Fin Stabilizers Image
Tender Chocks
Sliding Tender Chocks Image
Water Softener
Portable Water Softener Image
Watermakers
Generation 3 Stella Watermaker Image
Land Based Stella Watermaker Image
Aquarius Automatic Watermaker Image
Wind Generators
Rutland 1200 Windcharger Image
914i Wind Charger Image
504 Wind Generator Image
Driveline
Hydraulic Get Home Drive Image
Marine Chairs
Navigator Flybridge Image
Compact Helm Image
Air Conditioning
Self Contained Marine Air-conditioning Units
Self Contained Marine Air-conditioning Units Image

 

Seawater cooled self-contained unit

The Stellair range is suitable for all kinds of small and medium-sized yachts, high-speed passenger ships, fishing boats and some working ships. This air conditioning unit is designed by Stella specifically for marine applications.

Features

Every unit is light and compact, these systems are made to be installed under bunks, in cabinetry or any other enclosed space. More freedom at installation is achieved with a rotatable blower that can be adjusted to suit the space. Stella has designed these marine air conditioning units to last with corrosion-resistant features such as titanium tubes and a stainless-steel tray. The tray features drain ports to ensure condensation does not build up.

Stellair air conditioning units are engineered to maximise the performance of R401a refrigerant, which provides more efficient cooling or heating of your space while also being the most environmentally friendly option.

Our range varies in capacity from 3,500 BTU to 36,000 BTU, meaning it will suit all your cooling needs.

Control Panel

A sleek control panel accompanies this system with your choice of either black or chrome. User-friendly controls with an easy-to-read digital screen will help you reach your chosen air regulating mode. The system cools and heats with a 5-speed fan selection.

Digital Control Panel Features

  • Cool mode, Heat Mode, Fan Mode
  • F and C conversion function
  • 5-speed fan speed selection
  • High & low-pressure protection
  • Overload protection
  • Compressor 3 minutes delayed start function
  • Humidity control
  • Memory function
  • Timer on or off
  • Sleep and alarm function

In the box

Compressor, control box, sea water condenser, evaporator, centrifugal fan, 4-way reversing valve, all packaged as a compact component for easy installation and maintenance.

12 months limited Australian warranty

All Stellair Marine Air-conditioning Systems come with a 12-month limited warranty.

 

Downloadables:

Stellair Self-contained Air Conditioner Manual

Stellair
Split System Marine Air-conditioning Units
Split System Marine Air-conditioning Units Image

An incredibly robust and reliable marine air-conditioning system built to last in the harsh marine environment. Corrosion resistant, light weight and quiet, these are the most ideal systems to have installed on vessels with 3 or more desired spaces to be cooled.

Stellair Split System air conditioners are made with cupronickel condenser tubing. The two separate units – the condenser and the evaporator – both built upon stainless-steel trays, each of which feature 2 drain ports, ensuring condensation does not linger. 

 

Where to install the units

The condenser must be installed in the bilge, engine room or utility room where it is sea water cooled. The condenser is purely pumping R401a refrigerant around the boat to the fan coils. The fan coils can be installed in the cabin or under the berth where they are able to supply cooling or heating through the grilles. Stellair supply grilles have been designed with the intention of fitting the aesthetic of most boats, so they will seamlessly fit the interior of a vessel.

 

Features

Corrosion resistant, small volume, light weight.

 

Control Panel

A sleek control panel accompanies this system with your choice of either black or chrome.  User friendly controls with raised buttons and an easy-to-read screen will help you reach your chosen air regulating mode. The system cools and heats with a 5-speed fan selection.

 

Digital Control Panel Features

  • Cool mode, Heat mode, Fan mode
  • F and C conversion function
  • 5-speed fan speed selection
  • High & low-pressure protection
  • Overload protection
  • Compressor 3 minutes delayed start function
  • Humidity control
  • Memory function
  • Timer on or off
  • Sleep and alarm function

 

What it comes with

Compressor, control box, sea water condenser, evaporator, centrifugal fan, 4-way reversing valve, all packaged as a compact component for easy installation and maintenance.

 

12 months limited Australian warranty

All Stellair Marine Air-conditioning Systems come with a 12 months limited warranty. This is an Australian warranty, backed by us, the supplier.

 

Downloadables:

Stellair Air-Conditioner Split System Manual

Stellair
Chilled Water Plant Marine Air-conditioning
Chilled Water Plant Marine Air-conditioning Image

Stellair Chilled Water Plants are high-capacity modular chiller units designed for large pleasure yachts and commercial vessels. The System is made up of several chiller modules with the same capacity, cooling, and heating function. Individual modules range in capacity from 24,000 – 180,000 BTU. A combination of 1-6 independent modules in total can make up one whole Modular Chilled Water Plant.

The Chilled Water Plant uses sea water to provide heat rejection into the chilled water system.You will install multiple fan coil units through-out the yacht into each room.

Every yacht is different, and as such, every system will be designed differently.

Stellair Chilled Water Systems are custom designed to fit each vessel’s very specific air regulating requirements.

 

Installation

The Chilled Water Plants will be installed in the engine room or machinery space and mounted on to a suitable frame so the chiller plant is secure and cannot flex or move.

Air Handlers should be installed in a position in the cabin to allow for return air flow to the unit and ducted supply air back to the cabin. Common installation positions are in wardrobes, under beds, within built in seating, wall cavities etc.

 

12 months limited Australian warranty

All Stellair Marine Air-conditioning Systems come with a 12 months limited warranty. This is an Australian warranty, backed by us, the supplier.

Stellair
Air Treatment
TEAgel
TEAgel Image

When used in ventilation systems, boats, vehicles, RV’s, rooms, closets/lockers, and even the old gym bag, TEAgel®™ will neutralize and eliminate odors as well as provide long lasting freshness.

By harnessing the power of Tea Tree Oil, TEAgel’s slow releasing vapors work to naturally degrade mold, mildew and bacteria leaving only fresh, clean air behind.

Simply place a jar of TEAgel®™ anywhere you want to have fresh, clean air.

TEAgel®™ does not require airflow to work so it can be placed anywhere in a room.

TEAgel®™ uses only 100% all-natural ingredients.

Trac Ecological
Gelair Air Conditioning Blocks
Gelair Air Conditioning Blocks Image

What do Gelair™ Air Conditioning Blocks do?

Gelair™ Air Conditioning Blocks stop the spread of invisible mould, bacteria and viruses by slowly releasing Pure Tea Tree Oil vapor in high volume, high flow areas such as the Air H­­andling Unit (AHU) of an air conditioning system.

 

Tea Tree Oil 

Gelair Air Conditioning Blocks are pure Australian Tea Tree Oil in a specially formulated Gelair™ gel matrix block. Tea tree oil is a powerful and natural product that eradicates mould, bacteria and viruses. These nasties thrive in areas affected by moisture condensation such as air-conditioning units, bathrooms and kitchens. To combat this, Gelair is the simplest way of treating your indoor air quality. 

 

How is Gelair installed?

It couldn’t be easier. Open up the packaging and place the Gelair Air Conditioning Block in the AHU between the filter and the cooling coil. Gelair is supplied in a vacuum bag so some of the solution will be left in the packaging. This can simply be poured into the AHU and will help give an initial burst of tea tree oil vapour into the system. 

Gelair™ has been used worldwide for over 10 years. It is used in a wide range of marine, commercial and industrial applications and can be installed in any type of air conditioning system. Gelair™ is commonly used in Offshore Oil & Gas Rigs, Private Yachts, Charter Boats and Ferries. It is also widely used in Hotels, Office Buildings, Showrooms, Exhibition Centres, Hospitals, Movie Theatres, Day Care Centres and schools.

 

GelairAir-Conditioning Block sizes

Gelair™ Air Conditioning Blocks (known as ABs) are available in four sizes to suit different system capacities.

 

Product Size (litre) Code Blocks per box
AB0.5 Air Conditioning Blocks 0.5 GEAB05 24
AB1.0 Air Conditioning Blocks 1 GEAB10 10
AB2.0 Air Conditioning Blocks 2 GEAB20 8
AB4.0 Air Conditioning Blocks 4 GEAB40 1

 

Why Gelair?:

Gelair™ strictly adheres to the Australian Tea Tree Industry Association (ATTIA) Code of Practice to provide consumers independent assurance only the highest quality tea tree oil is being used in their product.

 

Why do I need Gelair?

Moisture build-up in air conditioning AHUs is inevitable. With Australia’s humid environment and condensation issues, our cooling systems provide the perfect environment for mould and bacteria to grow.

 If air conditioning systems are left untreated, we end up with:

  • The spread of invisible bacteria and viruses
  • The growth of mould throughout the system
  • A strong odour due to mould and bacteria
  • Unsightly stains on walls, ceilings and upholstery
  • Coating on the cooling coils which leads to inefficient heating and cooling
  • Increased energy costs and equipment corrosion
  • Release of allergy-causing spores and release of toxic gases
  • Increased instances of sick building syndrome: inhaling high concentrations of moulds, yeasts, bacteria and their spores and toxins is the most common cause of sick building syndrome.

 

By adding a Gelair block to your AHU, you have a natural, effective way of making sure your ducts remain healthy and more importantly, the air entering the occupant zones is treated for mould, bacteria and viruses.

Gelair block installed in the AHU of an air conditioning system

 

Gelair
Gelair Health-e SPLIT
Gelair Health-e SPLIT Image

What is Health-e SPLIT?

Gelair™ Health-e SPLIT is used in medium volume, medium flow split or reverse air conditioning systems to sterilise and sanitise the entire air conditioning system and effectively stop the spread of invisible mould, bacteria and viruses.

Highly effective Gelair™ healthy living technology has been incorporated within a specifically designed dispensing sachet for the sustained and controlled release of Pure Tea Tree Oil vapour.

 

Health-e Split Installation

The Gelair™ Health-e SPLIT sachet is installed directly next to the air conditioner filter (whether it is a wall mounted or ceiling cassette type) to kill mould, bacteria and viruses in your air conditioning system as well as the room it services for up to 8 weeks. No installation equipment or training is required and there are no maintenance or additional energy costs.

Gelair™ Health-e SPLITs are available in three fragrance options:

  • Pure Tea Tree Oil
  • Tea Tree Oil and Bergamot
  • Tea Tree Oil and Ocean Fresh

 

Why Gelair?

Gelair™ strictly adheres to the Australian Tea Tree Industry Association (ATTIA) Code of Practice to provide consumers independent assurance only the highest quality tea tree oil is being used in their product.

 

Why do I need Gelair?

Moisture build-up in air conditioning AHUs is inevitable. With Australia’s humid environment and condensation issues, our cooling systems provide the perfect environment for mould and bacteria to grow.

 If air conditioning systems are left untreated, we end up with:

  • The spread of invisible bacteria and viruses
  • The growth of mould throughout the system
  • A strong odour due to mould and bacteria
  • Unsightly stains on walls, ceilings and upholstery
  • Coating on the cooling coils which leads to inefficient heating and cooling
  • Increased energy costs and equipment corrosion
  • Release of allergy-causing spores and release of toxic gases
  • Increased instances of sick building syndrome: inhaling high concentrations of moulds, yeasts, bacteria and their spores and toxins is the most common cause of sick building syndrome.

 

By adding a Gelair block to your AHU, you have a natural, effective way of making sure your ducts remain healthy and more importantly, the air entering the occupant zones is treated for mould, bacteria and viruses.

Gelair block installed in the AHU of an air conditioning system

Gelair
Bow Thrusters
QS Seamaster Bow and Stern Thrusters
QS Seamaster Bow and Stern Thrusters Image

Designed for the most demanding yachtsman, developed together with boat builders. 

QS Seamaster has developed a complete and advanced line of DC, brushless, AC and hydraulic electric thrusters. Built and designed entirely in Italy, the product range includes 40 to 1100 Kgf models for boats and yachts up to 150ft.

 

QS Seamaster thruster benefits

The propeller

4 and 5 blade propellers designed specifically to ensure maximum performance and efficiency from each motor.
Propellers made of special composite or in NiBrAl. All double propellers are counterrotating.

The propeller of each of the thruster models between 40 and 1100kgf is specifically shaped in relation to its maximum revolutions, which provides the highest thrust efficiency.

 

The motor

A complete line of DC, AC, brushless DC-AC, retractable and hydraulic thrusters from 40 to 1100 Kgf thrust, available both with analogic or digital connection systems, on/off or proportional commands. The QS Seamaster bow and stern thrusters represent the most advanced range of products available on the market.

 

Noise

The noise production of QS Seamaster thrusters is reduced to the bare minimum due to the specific design of the propellers and the optimized streamline of the tail piece.

 

Installation

All of the thrusters we supply here at Stella are tunnel thrusters. 

Installation of a QS Seamaster bow thruster is super simple and requires minimal labour. 

A control panel, either equipped with a joystick or with push buttons, is available separately. Their shape and finish make these panels a perfect match with their engine instrument panels, allowing for a highly sophisticated combination.

 

Stella Backup Guarantee

Stella is proud to be the exclusive Australian importer and distributor of QS Seamaster Thrusters. Designed and manufactured in Italy, their Bow and Stern thruster product is second to none in quality and performance.

We don’t just sell the equipment; we also back it up. You can have confidence that with his vast years of experience that your installation will be the right one for your vessel.

Stella’s service and spare parts back-up is unrivalled, and in combination with the 2-year warranty from date of commissioning we know that your experience with our product will be trouble free.

If you have any questions, any problem or request, we are here to assist.

 

Stern Thruster

If you require almost absolute control of your boat under all imaginable circumstances, then a stern thruster is, in addition to a bow thruster, the ideal supporting navigational aid.

 

Benefits of a stern thruster

The combination of a bow and a stern thruster offers entirely new perspectives when maneuvering in tricky situations or in tight turns. By having the stern thruster rotating in the opposite direction of the bow thruster, you can make the boat turn on its axis. And when both propellers are operating in the same direction, you are maneuvering the boat perpendicularly on its normal direction line, to either port or starboard.

 

Installation of a stern thruster

The maintenance-free stern thruster is fitted to the transom of the boat. The electric motor and the other electrical components are positioned inside the boat, whereas the tunnel is located outside underneath the waterline. 

QS Seamaster Bow & Stern Thrusters.
Craftsman Bow Thrusters
Craftsman Bow Thrusters Image

Bow and stern thrusters have become an important device when moving at low speed.

It makes manoeuvring easier, safer and quicker.

 

Craftsman Marine thruster benefits

The propeller

The propeller, which is made of maintenance-free synthetic material, can run in two directions, thus producing a jet flow to port or starboard. Each propeller is designed to achieve maximum thrust in a small tunnel diameter. This makes maneuvering in tight spots against a strong current or a shifty wind much easier.

The propeller of each of the thruster models between 35 and 170kgf is specifically shaped in relation to its maximum revolutions, which provides the highest thrust efficiency.

 

The motor

Craftsman Marine specifies the average force of the thrusters, however the starting peak force (1 second) can be easily 60% higher.

 

Noise

The noise production of Craftsman Marine thrusters is reduced to the bare minimum due to the specific design of the propellers and the optimized streamline of the tail piece.

 

Installation

All of the thrusters we supply here at Stella are tunnel thrusters. 

Installation of a Craftsman Marine bow thruster is totally uncomplicated and requires a minimum of labour. 

A control panel, either equipped with a joystick or with push buttons, is available separately. Their shape and finish make these panels a perfect match with their engine instrument panels, allowing for a highly sophisticated combination.

 

Stella Backup Guarantee

Stella is proud to be the exclusive Australian importer and distributor of Craftsman Marine Thrusters. Designed and manufactured by Craftsman Automation, their Bow and Stern thruster product is second to none in quality and performance.

We don’t just sell the equipment; we also back it up. Supporting our product is David Tanner who few would argue is perhaps the most experienced marine professional in the field. You can have confidence that with his vast years of experience that your installation will be the right one for your vessel.

Stella’s service and spare parts back-up is unrivalled, and in combination with the 2-year warranty from date of commissioning we know that your experience with our product will be trouble free.

If you have any questions, any problem or request, we are here to assist.

 

Stern Thruster

If you require almost absolute control of your boat under all imaginable circumstances, then a stern thruster is, in addition to a bow thruster, the ideal supporting navigational aid.

 

Benefits of a stern thruster

The combination of a bow and a stern thruster offers entirely new perspectives when manoeuvring in tricky situations or in tight turns. By having the stern thruster rotating in the opposite direction of the bow thruster, you can make the boat turn on its axis. And when both propellers are operating in the same direction, you are manoeuvring the boat perpendicularly on its normal direction line, to either port or starboard.

 

Installation of a stern thruster

The maintenance-free stern thruster is fitted to the transom of the boat. The electric motor and the other electrical components are positioned inside the boat, whereas the tunnel is located outside underneath the waterline. Craftsman Marine’s stern thrusters come in four sizes and capacities, with tunnel dimensions of 110, 150, 185 or 250 mm.

 

Additional Parts

Control Panels

Bow and stern thrusters liberate the skipper from his heavy handiwork. The control panels of the Craftsman Marine bow and stern thrusters also contribute to optimum ease of operation. Both push button and joystick control are available.

In the case of only a bow thruster, a single panel is used. Dual panels serve the purpose of both a bow and a stern thruster.

The top sides of the panels are made watertight in accordance with the protection classification IP66. Craftsman Marine thruster control panels are milled from an aluminium sheet and anodised to ensure perfect protection against all (marine) weather conditions. They also include protection for motor direction, temperature and continuous use.

 

Cables

Connection cables in 7,10, 15 and 20m lengths.

To connect the bow and/or stern thrusters to the appropriate control panel, a cable loom is required, which can be ordered to size, in lengths from 7 to 20m.

Craftsman marine cables come with watertight, multi-plugs. Cables of different lengths can be interconnected. With the aid of a splitter cable, two control panels can be connected to only one bow or stern thruster. 

 

Tunnels

GRP and steel to suit each thruster in 1 and 3m lengths.

Craftsman Marine can supply the required tunnels in various lengths and diameters, in steel, aluminium or GRP (fibreglass reinforced polyester) to suit each thruster in their product range.

 

Downloadables:

Craftsman Bow Thruster Range

Craftsman Marine
ABT TRAC – HYDRAULIC BOW THRUSTERS
ABT TRAC - HYDRAULIC BOW THRUSTERS Image

The Hardest Pushing Boat Thrusters Ever Built

ABT TRAC bow and stern thrusters generate more thrust per horsepower than any other boat thruster on the market. One word to describe ABT TRAC systems – Powerful.

ABT-TRAC bow and stern thrusters deliver more thrust per horsepower than any other thruster available. TRAC’s twin counter-rotating propellers are more efficient and can reach higher horsepower than single prop thrusters.

ABT TRAC hydraulic thrusters are fitted with high efficiency piston motors. 8’ thru 12’ thrusters are available in a DC version and all ABT-TRAC thrusters are available in AC versions.

 

Thruster Controls

Thruster control is available in single or proportional speed. Proportional thruster control enables precise manoeuvring control.

 

TRAC Integrated Hydraulic System

Most ABT-TRAC thrusters are powered by a TRAC Integrated Hydraulic system. Integrated Hydraulics may also support stabilizers, windlasses, capstans, cranes, or other hydraulic equipment.

 

ABT-TRAC Thrusters promise Heavy Duty Service and Reliability

ABT TRAC bow and stern Thrusters are built for heavy duty service. Gears and bearing are intentionally oversized. Propeller hubs shroud the gearbox to protect the prop shaft. A rotating seal guard provides absolute protection of the shaft seals. ABT-TRAC boat thruster systems are extensively documented and delivered ready-to-install. Expert support is always available from factory technicians and through our extensive global service network.

 

ABT TRAC Thruster Service or Installation

ABT-TRAC Thrusters are installed as standard equipment by more of the world’s top yacht builders than any other brand. For exceptional performance, highest quality and unmatched support choose TRAC thrusters for your boat.

We don’t just sell the equipment; we also back it up with a complete installation, commissioning and maintenance service via our marine engineering division who have been factory trained by TRAC technicians.

ABT-TRAC
Integrated Hydraulic Systems
Integrated Hydraulic Systems Image

ABT-TRAC manufactures advanced integrated hydraulic systems that not only power the ABT-TRAC range of Thrusters and Stabilizers, but also included ancillary equipment such as capstans, windlasses, cranes, generators, bilge pumps and more.

Every vessel gets evaluated individually and the system is custom designed to support the specific needs of your yacht.

Using high efficiency hydraulic piston pumps driven from the main engines or PTO’s from the marine gears or generators, you can be sure your system will be ready to perform.

AC power packs are often added to provide back up and hydraulic power while you are at anchor. TRAC also designs all systems with expansion in mind, so rest assured that your system can grow to meet your hydraulic demands.

All of TRAC’s systems come standard with high-capacity cooling, so you can operate the system continuously without heating, we also closely monitor oil levels and temperature so you know your system is always safe.

With thousands of systems out in the marketplace, powering vessels all over the world you can be assured that you have a quality system that is backed up by our expert factory trained technicians and global service partners.

ABT-Trac’s systems are installed as standard equipment by more of the world’s top yacht builders than any other brand. If you expect exceptional performance, outstanding quality and unmatched support, you can’t go past a Trac system.

 

Downloadables:
ABT-TRAC Integrated Hydraulic System

ABT-TRAC
Dualis Thruster Range
Dualis Thruster Range Image

Dualis Electra Bow Thrusters

The electric bow thruster with a high thrust/power ratio and compact installation size you’ve been looking for – Dualis Electra by CMC Marine.

Dualis Electra uses a new generation of electric motors that, coupled with the up-to-date CMC Marine pod, offers all the advantages of traditional electric thrusters, while the overall volume and weight of the entire system is dramatically reduced.

 

Benefits of the Dualis Electra AC-Driven Bow and Stern Thrusters

  • Engineered for heavy-duty use
  • Low volume and weight
  • Reliable and durable
  • Low Noise level
  • Easy Installation
  • Compact Unit Dimension
  • Maximum efficiency and optimized hydrodynamics
  • Low Maintenance

 

Directa control advantages

  • A Variable Frequency Drive (VFD) controls the electric motor power consumption.
  • The VFD is spray resistant for safety and protection (shielded IP64).
  • The switchboard is also spray resistant (shielded IP64).
  • Full Proportional and directional control.

The joystick on the control panel allows proportional thrust increase or reduction. The control panel is very compact and is available in a dual joystick version for bow and stern thruster.  

 

Bow and stern thruster tunnels

CMC Marine offers Tunnels made of reinforced GRP, aluminium alloy, or steel.

You can also choose between several standard diameters and lengths.

Hydraulic Version Available

 

Dualis Thruster Hydro 

Reliability you can count on.

Sharing the same mechanics as the Dualis Electra, Dualis Hydro is the hydraulic-powered version! The mechanics (pods, tunnels, etc) and the interfaces (command panels, etc) are all the same.

CMC’s Dualis Hydro bow thrusters all feature dual counter-rotating propellers, which can be mounted either at the bow or stern.

The thrusters are suitable for a wide range of uses with available power from 18 to 130 KW.

Suitable for vessels with steel, aluminium or composite hulls starting from about 18 – 20 metres.

 

Dualis Thruster Hydro advantages

  • Highly efficient
  • Proven reliability
  • Low Noise level
  • High Flexibility
  • Wide Power range
  • Use of dual counter rotating propellers
  • Low hydro Dynamic resistance

Electric rudder control system that, when integrated with other Waveless products STAB and Trim, can provide excellent course keeping and smooth changes of direction.

Cruising will never be the same.

 

Dia-log

Waveless products are equipped with CMC Marine’s patented DIA-LOG software, the same used on super and mega yachts.

Underway and Anchor mode are always available.

You can have complete control of your system thanks to a touch screen, designed to have all the features at your fingertips.

 

Features Available:

Flip

FLIP mode allows the STAB fins to rotate 180° while in Anchor mode.

Reduce ”anchor walk” and keep the anchor chain tight and the bow in the wind in any weather condition.

Actual flip angle can be adjusted at commissioning time to account for hull shape and prevent interference with the chain.

 

Night Mode

Reduce STAB power absorption to approximately 60%, while in Anchor mode.

Night mode is useful to limit power demand on generators and extend battery duration when working on the yacht’s DC system.

 

Adaptive 

In Adaptive mode, your STAB system monitors sea conditions and adjusts operation parameters automatically to provide the best stabilization for every condition.

 

Integrated Stabilisation System

CMC Marine’s has established its industry leadership for motion control, through a full range of solutions. Every system is an assembly of the most advanced, robotic-industry standard technologies, made to work with the highest standards of performance, accuracy, fast response, reliability and energy efficiency. All systems can operate independently whenever required, but maximum performance is achieved when they work together, controlled by the same algorithm, processor and motion sensors. Dia-log performs at its best when installed with waveless stabilisers and trim.

CMC Marine
Descalers and Cleaners
Barnacle Buster Concentrate
Barnacle Buster Concentrate Image

Engine overheating? A/C not cooling? Clogged pipes? Use Barnacle Buster™

 

What is Barnacle Buster?

Barnacle Buster is a safe, non-toxic and biodegradable marine growth remover specifically formulated to meet an industry wide need for fast, safe, cost effective alternatives to mechanical cleaning of seawater cooled equipment. 

With minimal dismantling required, Barnacle Buster can be safely re-circulated through seawater cooling systems, dissolving barnacles, zebra mussels, calcium, rust, lime & all other mineral deposits, without harming equipment, gaskets or seals. Most applications can be completed within 4 hours!

When used as directed, TRAC Ecological’s marine cleaning solutions will preserve the properties of most surfaces including plastic, rubber, fibreglass, vinyl and wood and will not harm paint or metals (with the exception of zinc-based metals). Aluminium designed for use within water systems is also compatible with all TRAC products. 

 

What are the side effects of marine growth?

Build-up of marine growth is the number one reason why sea water-cooled equipment malfunctions. These deposits will reduce equipment efficiency & most likely will result in costly equipment downtime. A thin layer of growthcan result in a 15% decrease in efficiency. While conventional methods of cleaning (such as mechanical brushing or harsh acids) do have some success, they are harmful to both the user and the environment & can easily damage the equipment or vessel.

 

Types of applications

Barnacle Buster™ can safely be used to remove marine growth from:

  • Engines seawater cooling systems
  • A/C & refrigeration cooling systems
  • HULLS
  • SEACOCKS
  • SEA STRAINERS
  • Boat bottoms 
  • All types of heat exchangers 
  • Bow thrusters 
  • Water makers 
  • Propellers 
  • Pumps 
  • PIPING

 

When to use BARNACLE BUSTER®

  • As a general rule of thumb, flushing your engine once a year is a good preventative maintenance measure. This is especially important on engines with flexible rubber impellers. Marine growth is the most common cause of impeller failure.
  • Monitoring your engine’s temperature is crucial. A consistent temperature increase of 5-10 degrees could mean a problem is starting to form within your cooling system. Flushing before the problem gets worse could save you a world of headaches.
  • On most engines, seawater discharged from the engine is used to cool the exhaust gases exiting the engine. If this water flow is reduced, steam (or white smoke) will begin to exit from the exhaust. One reason for this could be a clogged heat exchanger or after cooler. Flushing the engine may prove to be an inexpensive troubleshooting technique for a boat owner.

 

Instructions:

Barnacle Buster – Chiller Plant Seawater Side
Barnacle Buster – Seawater Engine Cooling

 

Safety Data Sheet:

TDS – Barnacle-Buster

 

Trac Ecological
Descaler Concentrate
Descaler Concentrate Image

Descaler removes scale from fresh and brackish water applications.

 

TRAC Descaler can safely be used within engines, cooling towers, boilers, or just about any other systems re-circulating water. TRAC’s Descaler will not harm gaskets, seals, plastics or any metals commonly found in water systems.

Although mechanical methods of cleaning are available, they often require extended periods of downtime and it is nearly impossible to reach all areas of the system. Chemical cleaning is the only proven method to clean the entire system, thus returning the equipment to its original efficiency.

TRAC Descaler is biodegradable and can be disposed through regular sewer system

TRAC Descaler passed the California Fish Toxicity Test, Department of Hazardous Substances (Title 22) and complies with NSF International standard 60.

When used as directed, TRAC Ecological’s marine cleaning solutions will preserve the properties of most surfaces including plastic, rubber, fibreglass, vinyl and wood and will not harm paint or metals (with the exception of zinc-based metals). Aluminum designed for use within water systems is also compatible with all TRAC products. 

 

Why use Descaler?

Cost effective: Guaranteed to be ¼ of the price of traditional mechanical methods while yielding superior results

Fast: While other chemicals are available on the market, most requiring extensive treatment time. TRAC Descaler completes most applications within 5 hours!

The environment first: Like all of TRAC’s products, TRAC Descaler is 100% biodegradable, safe and completely non-toxic.

 

Instructions:
Descaler – Cooling Towers
Descaler – Engine Coolant Systems
Descaler – Heat Exchanger

 

Technical data:
TDS – Descaler

Trac Ecological
GreenClean Coil Cleaner
GreenClean Coil Cleaner Image

GreenClean Coil Cleaner®™ is a fast-acting coil cleaner that will penetrate deep within the coil removing years of caked on sediment.

This unique non-foaming and non-fuming formulation uses a blend of powerful, fast acting organic salts, specifically formulated to replace fuming acidic coil cleaning solutions.

Trac’s GreenClean Coil Cleaner®™ will not corrode metals, is 100% phosphate free, contains no phenols, no butyl cellosolve, dyes or fragrances and emits no VOC’s.

Trac’s GreenClean Coil Cleaner®™ is also perfect for cleaning ice makers as it will not attack CuproNickel alloys!

As with all Trac Ecological products, GreenClean Coil Cleaner®™ has been formulated to be safe, non-toxic and 100% biodegradable in less than 28 days, allowing for safe handling and safe disposal.

When used as directed, TRAC Ecological’s marine cleaning solutions will preserve the properties of most surfaces including plastic, rubber, fibreglass, vinyl and wood and will not harm paint or metals (with the exception of zinc-based metals). Aluminum designed for use within water systems is also compatible with all TRAC products. 

 

Why use COIL CLEANER?

The environment first: Truly Green, this solution is non-toxic, biodegradable, safe to handle, and easy to dispose of. No dyes, fragrances, phosphates, phenols or toxic butyl cellosolve.

Effective: One concentrated cleaner for all coils.

A safer coil cleaner: This acid free, 100% biodegradable coil cleaner is safe for all metals and breaks down within hours not years! Non-toxic to humans or aquatic organisms.

Saves Energy: Independent testing proves clean coils reduce energy costs by up to 20%!

 

Technical data:
TDS – GreenClean Coil Cleaner

Trac Ecological
PSR
PSR Image

Use PSR to remove hard water stains, lime scale, rust, or any other mineral based scale deposits from your potable freshwater system.

 

What is PSR?

PSR® has been formulated to rid your potable freshwater system of odours & discoloration by attacking the source. Scale builds on low lying, flat sections of your system, allowing bacteria to form. PSR® targets these areas and brings new life to your system.

Originally designed to cure problems within public drinking water systems, PSR®™ has been specially formulated to meet strict NSF requirements. PSR®™ uses only food grade rated materials. This gives you peace of mind knowing that your system will remain safe for drinking.

If you have ever seen what contaminated fresh water looks like, then you can appreciate what PSR®™ can do.

PSR®™ provides impeccable results without having to remove any piping or create a mess.

All Descalers are built on TRAC Ecological’s proven formula which provides a safe, non-toxic & biodegradable solution.

When used as directed, TRAC Ecological’s marine cleaning solutions will preserve the properties of most surfaces including plastic, rubber, fibreglass, vinyl and wood and will not harm paint or metals (with the exception of zinc-based metals). Aluminum designed for use within water systems is also compatible with all TRAC products. 

 

Benefits of PSR:

Meets NSF requirements: PSR®™ has been formulated to meet strict NSF requirements for use within municipal drinking water systems. This is a Marine Industry first!

The environment first: Like all of TRAC’s products, PSR®™ is 100% biodegradable, safe and completely non-toxic.

Maintenance made easy: Using PSR®™ to clean your water system allows for a totally new way of system cleaning. Traditional cleaning: replace clogged screens, fittings and hoses. Clean system with bleach or vinegar. Using PSR®™: ½ day down time, simply fill the tank and run through the system using your existing pump!

Safe for equipment: PSR®™ is non-corrosive to all metals, plastics, gaskets and other materials commonly found in potable water systems. PSR®™ passed the California Department of Health Services (DOHS) Bioassay for Hazardous waste (Title 22)

Using TRAC’s Advanced Descaling Technology™ you can clean your entire system while enjoying minimal dismantling, reduced downtime and substantial cost savings.

 

Instructions:
PSR – Potable Water Systems

 

Technical data:
TDS – PSR

Trac Ecological
Sew Clean
Sew Clean Image

Eliminate problematic clogs and odours with Sew Clean®™

 

Unclog black water systems

TRAC Ecological have formulated an effective cleaner that can dissolve clogs and remove nasty odours in black water systems. Sew Clean®™ has been formulated to provide impeccable results without removing any piping or creating a mess.

 

What is Sew Clean®™?

Sew Clean®™ builds upon the proven Barnacle Buster™ formula and takes it one step further. Sew Clean®™ cleans sewage systems from toilet to tank by unclogging your pipes with the best and most proven method of removing any build-up of uric scale in black water systems. Special attention has been given to ensure that foam and bacteria are significantly reduced while flushing.

Like all TRAC’s products, SEW Clean®™ is non-toxic, biodegradable and safe to use on all types of materials commonly found in black water systems. 

When used as directed, TRAC Ecological’s marine cleaning solutions will preserve the properties of most surfaces including plastic, rubber, fibreglass, vinyl and wood and will not harm paint or metals (with the exception of zinc-based metals). Aluminum designed for use within water systems is also compatible with all TRAC products. 

 

Benefits of Sew Clean®™

No mess: Gone are the days of dismantling toilet systems for cleaning, SEW Clean®™ requires no dismantling.

Not a treatment product: Sew Clean®™ is a black water system cleaner, not a sewage treatment chemical. There is nothing like it on the market today.

Safe for equipment: Sew Clean®™ is non-corrosive to all metals, plastics, gaskets and other materials commonly found in black water systems.

The environment first: Like all of TRAC’s products, Sew Clean®™ is 100% biodegradable, safe and completely non-toxic.

Easily disposed: Safe for disposal in the sewer system. Restrictions vary per geographical location. Be sure to refer to your local guidelines for disposal policies.

 

Instructions:
Sew Clean – Black Water Systems

 

Technical Data:
TDS – Sew Clean

Trac Ecological
Hydraulic Swim Platforms
Hydraulic Swim Platforms for Yachts
Hydraulic Swim Platforms for Yachts Image

Australia’s Strongest Range of Hydraulic Swim Platforms

Patented Technology and Precision Engineering make Stella Hydraulic Swim platforms the best Hydraulic Swim Platforms of their kind.

Each Stella Swim Platform is engineered to perform. A unique Australian concept is what ensures a smooth and even raising and lowering of the platform. Patented technology will allow the platform to be lockable in any position. The entire weight of the hydraulic swim platform is evenly dispersed across the transom with hydraulic cylinders on both sides. The lifter arms are constructed of marine grade stainless steel, including the cylinders to minimise corrosion.

Every boat is different and as such every platform is designed different. Using the drawings and measurements of your boat our design engineers create a platform unique to your needs.

Hydraulic Swim Platforms have become a ’must have’ accessory on all new builds and refit projects. Considering the many value adding benefits such as extending the real estate of a boat, creating a safe platform for swimming and being a carrier for jet ski and tenders – it’s really no wonder.

While underway, the platform should always be in the stowed position for safety. 

 

Features of Stella Swim Platforms

  • Safe one person operation.
  • Remote control operation with automatic sleep mode. 
  • The arms themselves are much lighter than our competitors resulting in less stress on the transom. 
  • Easier installation and maintenance thanks to the square design. This will help with removing barnacle build up and applying antifoul – Shipwrights will not want to deal with another lifter after working with this. 
  • Patented Hydraulic Technology resulting in an even raising and lowering. 
  • Patented Positive Locking in all positions. 
  • Designed to be completely customizable to suit the aesthetic and lines of the boat. 

 

Technical Specifications

  • Dual hydraulic cylinders. 
  • 4 valve hydraulic power unit (12 or 24 VDC) Ignition protected. 
  • Engineered for strength and durability. 
  • Internal hydraulic flow control. 
  • External hydraulic line with 316 Stainless Steel fittings. 
  • CNC Precision Machined

 

Balance Below Waterline

Our Lifter mechanisms are sleek, strong and powerful – and they seriously look good!

  • Two individual Lifter arms aid to evenly disperse weight across the transom 
  • Customizable lift capacity, the biggest we’ve done is 2 tonne. Enquire with us and we’ll get back to you with what our Lifters can do.
  • Hydraulic connections on both sides.
  • Design gives freedom to adjust arm/platform placement on the transom. So there’s room to play with our Swim Platforms!
Stella
Marine Chairs
Navigator Flybridge
Navigator Flybridge Image

The Navigator Flybridge Seat.

Designed for open water use, the Navigator Flybridge Seat is covered in Marine Grade Vinyl (or custom materials on request).
Navigator seats are available with or without headrests. Both options will look great on board your boat, allowing you to arrive at your destination in style, comfortable and relaxed. Those who don’t travel in Navigators will envy you!

According to your needs, the Flybridge Seat can be mounted on pedestals, swivel bases, or sliding bases.
Navigator Seats feature stainless steel frames with an adjustable backrest, moveable armrests, removable headrests, and the standard sports flip up.

Navigator Flybridge Seats are upholstered in a pliable, hardwearing, UV-resistant vinyl in a multitude of colours and trims from the Navigator fabric collection.

Compact Helm
Compact Helm Image

The Navigator Compact Seat.

All the usual Navigator features in a more compact version. This seat provides excellent ergonomic comfort and navigation safety.

Specifically designed for smaller boats where there is limited space at the helm or if you need a lower backrest to see what is behind you easily. The Compact Helm is the seat for you!

Featuring stainless steel frames with an adjustable backrest, moveable armrests, removable headrests, and the standard sports flip up.
The Compact Helm can be covered in our own UltraFabric, or Marine Grade Vinyl. They are upholstered in a pliable, hardwearing, UV-resistant vinyl in a multitude of colours and trims from the Navigator fabric collection.
According to your preference, the Compact Helm Seat can be mounted on pedestals, swivel bases, or sliding bases.

Marine Sewage Treatment
Marine Sewage Treatment System
Marine Sewage Treatment System Image

Treat the black water on your vessel with BLUE SEA

With BLUE SEA it is now possible to discharge wastewater directly into the sea with full respect for the environment and compliance with current standards, at the same time avoiding heavy and inconvenient waste collection tanks and long drainage procedures in authorized ports. 

 

Treat the black water on your vessel with Blue Sea

The BLUE SEA system is a new generation wastewater purifier capable of treating from 2500-22000 litres a day. 

The Blue Sea system is equipped to purify, macerate and sterilize all in accordance with the enforced norms regarding the discharge of wastewater into the sea.

In fact, a BLUE SEA marine wastewater treatment plant guarantees the elimination of bacterial pollution through an oxide/reduction process and, most of all, drastically reduces TSS, BOD5, COD, turbidity and the organic and physical pollutants in wastewater produced on a boat, thanks to the fine purification system. 

Selmar BLUE SEA treated wastewater complies with the international regulation of “Marpol” environmental rules. 

Selmar’s purification system is based off of an advanced oxidation-reduction process as well as being equipped with two units of U.V sterilization (primary and secondary), an air blower, oxygenation unit, flotation system, “cleaning/sanitation” unit and the advanced maceration/comminution stage. All of these stages and units together complete the marine sewage treatment plant and make it unique in its kind.

The “Advanced Oxidation Process (AOP)” uses a combined action of ozone, OH free radicals, ultraviolet rays and hydrogen peroxide, making it incredibly effective for black and grey wastewater treatment.

 

Selmar BLUE SEA Range Specs Tables

 

Models & Characteristics

 

Model Litres/day Litres of waste water treated per cycle Time to the process Nominal AC power consumption Dimensions (LxHxD) mm Weight
BLUE SEA 2500 2500 26 15 min. 1,2 kW 620 x 730 x 715 80 kg
BLUE SEA 3500 3500 38 15 min. 1,5 kW 620 x 930 x 740 100 kg
BLUE SEA 4000 4000 45 16 min. 1,5 kW 620 x 1130 x 740 115 kg
BLUE SEA 7000 7000 95 20 min. 1,5 kW 670 x 900 x 1025 128 kg
BLUE SEA 12000 12000 138 18 min. 1,5 kW 990 x 900 x 900 132 kg
BLUE SEA 22000 22000 400 25 min. 1,5 kW 980x1750x1250 205 kg

 

Hydraulics: System Characteristics

 

Input/output terminals for models 2500, 3500, 4000, 7000 and 12000:
Influent: black and grey water 1.1/4”
Sea water inlet 1.1/4”
Discharge Effluent 1.1/2”
Overflow 1.1/4”
Air Vent 1.1/4”
Air inlet 3/4”
In/out primary U.V. 1.1/4”
Input/output terminals for model 22000:
Influent: black and grey water 1.1/2”
Sea water inlet 1.1/2”
Discharge Effluent 2”
Overflow 1.1/2”
Air Vent 1.1/2”
Air inlet 3/4”
In/out primary U.V. 1.1/4”

 

Standard Features

  •   Automatic cleaning system
  •   Liquid oxidant tank
  •   Electronic overflow
  •   Mechanical overflow
  •   Hour meter
  •   Primary “U.V. STERILIZER” with control box
  •   Air blower
  •   Cycle counter
  •   Mechanical sensor of minimum level for onboard sewage tank, with installation kit
  •   Operator panel with LCD display for control and self-diagnostics

 

Accessories and Extras

  •   Macerator booster pump
  •   Seawater pump
  •   Air filter (activated carbon)
  •   U.V. sterilizer for post-secondary treatment
  •   Remote control with LCD display
  •   Siphons for the sewage water and seawater charging lines
  •   Grease traps:
    • Mod. SEL 075/T
    • Mod. SEL 125/T
    • Mod. SEL 175/T
    • Mod. SEL 075/plus
    • Mod. SEL 125/plus
    • Mod. SEL 175/plus
Selmar Technologies
Marine Toilets
Luxury Marine Toilets
Luxury Marine Toilets Image

The technical features integrated into every Planus marine toilet are what set them apart from any other in the marketplace. The pump has an 80 meter vertical and 8-meter head – you are not restricted by plumbing lengths or head heights. They are designed to be as quiet as possible. Planus have patented systems that eliminate cavitation in the bowl and hammer in the water pipes. Planus toilets are brilliant for fitting in small spaces, specifically designed to fit a full-sized porcelain bowl onto yachts. The only real difference between the range of Planus toilets is the porcelain shape – technically they are the same.

 

Technical Features


The Vortex System

The high-speed rotation of the VORTEX pump and the geometric design of its piping create a great vacuum able to remove water and organic waste from the bowl. The high-level performance ensures the greatest possible flexibility in planning the route of the discharge hoses, allowing it to reach significant distances and heights. 

 

Air Vent Anti Cavitation

The noise of the vortex pump in many marine toilets is due to cavitation caused by the presence of air in the pump that is sucked through the toilet drainage hole at the end of each discharge sequence. Planus systems use a patented “automatic vent air discharge” system that enables the pump to run without cavitation. No cavitation = minimal noise. 

 

Water Hammer Arrestor 

Planus has introduced the “water hammer arrestor” as a standard component of its preassembled inlet solenoid, eliminating hammer in the water pipes when the solenoid shuts off. This device is very effective in reducing noise and vibration along the inlet pipeline. 

 

Dripping Water System

Planus makes the ceramic bowl with a “dripping water system”. This system eliminates the need for ugly, noisy plastic nozzles inside the toilet bowl. 

 

Rectified Bowls

Planus rectifies its bowls in order to guarantee the perfect installation. Planus, after porcelain bowls cooking, rectifies both the base and the rear wall by the use of a numerical control machine. This further work guarantees a perfect and uniform (90°) toilet.

 

Soft Close Hinge Option

The new soft close hinge, in ASI 316 stainless steel, offers high slowing down efficiency, elegance and firmness. 

The soft close system is nowadays a common feature offered to the market. However this system has so far only been applied to light plastic seats and cover. Planus differentiates itself in this regard after having developed a series of soft-close hinges with original highest quality SUGASTUNE damers, world’s leader in this field, and applied them to its luxury wooden seat and cover with bright polyester coat.

 

High-Quality Seats

Planus supplies its bowls with a high-quality wooden seat covered with a polyester coating, available in standard or soft close. 

 

Control Panels

We stock and supply a One Button controller and a Two-Button controller. The biggest difference is that the Two Button controller will ensure there is no water left in the bowl after use. 

 

The Three Models Explained and their key differences

Stella supplies three types of Planus toilets – Match, Stilo and New Artic. These are then further broken down into Match Short, Match Cut Short, Stilo Plus, Stilo, and New Artic. 

 

Defining the models:

Cut A ’Cut’ model of a Planus marine toilet means that the back has been cut at an angle for best installation practice. 

Short Is as its namesake suggests, the shorter version.

 

Distinguishing features

Match models are the shortest Planus Toilets. The only difference between Match Short and Match Cut Short is the angle at which the back of the toilet is cut. 

Stilo is the middle model, it is taller than the Match series and shorter than the New Artic

Stilo Plus has the largest bowl, longest top area, and biggest base.

New Artic is the tallest and skinniest with the smallest bowl. 

 

Dimensions

A side by side comparison of each toilet and it’s dimensions is supplied.

Dimensions (mm) Match Short Match Cut Short Stilo Plus Stilo New Artic New Artic Short New Artic Cut Short
Bowl Width 373 373 381 373 370 370 370
Base Width 285 285 273 273 273 273 273
From wall top 480 480 530 480 430 430 430
From wall base 330 330 356 313 350 350 337
Vertical 350 350 400 400 460 410 410
Cut Angle 90º 90º 90º 90º 90º 79.16º

 

Downloadables:

Planus Match Short Dimensions

Planus
Marine Wipers
Marine Windscreen Wipers
Marine Windscreen Wipers Image

Windscreen Wipers, Blades & Motors for Boats

Wipers designed for use in all marine environments.

Exalto produces the world’s best professional marine wiper systems for all kinds of vessels in the commercial and leisure sectors. 

They offer a wide range of high performance motors, innovative arms, durable blades, controls and washing systems. In this way Exalto can compile a complete wiper system that fulfils the specific demands and wishes of the customer. 

 

Exalto Wiper Systems Advantages

Exalto wipers have stainless steel shafts and fixings. The drive shafts run in self lubricating brass bearings to ensure many hours of trouble-free performance. The wipers feature two speeds, self parking and offer in combination with one of our many control systems intermittent speeds, smart wipe/wash function and on certain system synchronized wiping.

All MD and HD wiper arms and blades are manufactured from T316SS. Exalto Wiper Systems are made of high quality materials to assure many years of reliable work. The wiper systems are designed in our own Research and Development Centre and have undergone intensive testing. Exalto offers complete systems. 

 

A typical wiper system contains 

  • Wiper motors
  • Wiper arms
  • Wiper blades
  • Wiper controls
  • Washing systems

 

Sizing the right windscreen wiper blades and arms for your boat

The size and shape of the glass that has to be wiped determine which motor, arm and blade are needed. The larger the wiping area, the larger the arms and blades have to be to cover that area. The larger the arms and blades are, the stronger the motor has to be. Therefore we divided our products in sections: large windows (1100-2500mm in height), medium and small sized windows (till 1100mm in height). 

 

Exclusive Australian Exalto Suppliers

Stella supplies the entire Exalto Marine Wiper System range. Our staff are experienced in designing the right wiper system for boats so please enquire and we will make sure you are fitted with the right windscreen wipers, blades, arms, motors and washing systems for your boat.

 

Downloadables:

Exalto 2020 marine wiper catalogue

Exalto
Rope Cutters
Rope and Line Cutter
Rope and Line Cutter Image

The revolutionary quicKutter© system eliminates rope and line problems.  The system has no moving parts to wear out and is easy to install. 

 

How does the Quickwater quicKutter© System Work?  

The Quickwater spool is fixed to the propeller between the propeller and bearing carrier to prevent the rope or line from wrapping around the shaft. It provides a surface for the rope or line to wrap around to enable the quicKutter© blades to continually cut the coils of rope or line as they form and are pressed against the quicKutter© blades.

The quicKutter© is fixed to the bearing carrier and protrudes out over the Quickwater spool surface ensuring that the clearance does not allow rope or line to pass under the blade and that rope or line is continually cut away to allow a continuous flow of water to exit from the bearing.

 

Boat rope cutter demonstration gif

 

 

QuicKutter Benefits

Avoid Entanglement and Bearing Failure

Rope and line entanglement can cause bearings to overheat or damage to seals

 

Cuts Rope, Line, Weed, Stainless Steel Wire*

Rope and line up to 1“ (25mm) and 3/16“ (4.75mm) SS cable *with optional hardened blades 

 

Improve Crew Safety

Avoid possible structural damage and loss of propulsion, reduce need to dive overboard to untangle

 

Reduced Maintenance Costs

Increased bearing and shaft life, reduced downtime and avoid potential loss of income

 

Boat Speed and Performance

Streamlined design creates less turbulence, vibration and drag than other cutter designs

Cuts Rope, Line, Weed, Stainless Steel Wire*

Rope and line up to 1“ (25mm) and 3/16“ (4.75mm) SS cable *with optional hardened blades

 

Australian Designed and Manufactured

Patented shaver cutter, buy Australian and support your local industry

 

Available in 4 sizes

Series 16 for shaft sizes 1“- 2“, Series 25 for Shaft sizes 2“- 4“, Series 32 for Shaft sizes of 4“- 6“ and series 57 for larger applications

Easily installed and fits all shaft sizes (Can be fitted to vessels with full keels).

quicKutter
Shaft and Rudder Bearings
Shaft and Rudder Bearings
Shaft and Rudder Bearings Image

Maritex Bearings are purpose made for seawater and uniquely designed for the dual purposes of water lubricated hydro-dynamic high speed rotating shafts as well as completely self-lubricating slow speed applications such as rudder and ride control bearings. Intended for ambient marine operating temperatures the material has outstanding dimensional stability for both wet & dry operating conditions.

 

Maritex Bearings in Silty Water

When operating for extended periods in silty water, customers with vessels operating in both temperate and tropical waters have reported that Maritex Aquarius propeller shaft bearings perform extremely well. In fact the performance of Maritex Aquarius bearings operating in silty water is well beyond their expectations.

 

Maritex Bearings Rry Running

In addition to being developed specifically for long term immersion in seawater, Maritex bearing material is outstanding in dry conditions. It is a hard wearing, low friction, tough bearing material made from high strength thermoset resin reinforced with synthetic fibres.

 

Excellent Wear Characteristics

Unique reinforced Novalac resin composite provides outstanding strength and durability

 

Superior Dimensional Stability

Non-melting, outstanding creep resistance and higher operating temperature together with natural lubricity permits unrivalled dry running capability

 

Low and High-Speed Applications

Easily handles dry or wet operation at low speed e.g. hinge type rudder bearings

as well as high speed continuous water lubricated propeller shaft bearings

 

Easy to Machine

Virtually zero dust and smell, no tip wear and no annoying ribboning swarf

 

Antifouling Properties

Mechanical: unique synthetic fibres resist and scrub out potentially harmful abrasives

Chemical: material contains chemicals to reduce marine growth

 

Australian Designed and Manufactured

Buy Australian and support your local industry

 

Lloyds Approval

Maritex Grade 1810 is Lloyd’s Register Type Approved and

Maritex AQUARIUS® is in the process of gaining type approval

Maritex
Stabilizers
STAB
STAB Image

Waveless is the new line of ultracompact electric fin stabilizers designed for boats of 12 meters (40 ft) in length and up, offering STAB stabilizer models and TRIM intruder models. Same quality and performance as superyachts, CMC systems have been customized for smaller yacht needs. 

Waveless STAB is designed to be installed quickly and with no stress. It takes little space (and  weight) on board so it can be moved and placed easily. And being electric, no piping is needed. 

 

Waveless Advantages

Top Quality 

Best-in-class roll reduction both Underway and At Anchor, with softer (lower acceleration) yacht  motion for unequalled comfort. 

 

Ultra-Compact 

The smallest unit has onboard dimensions of 38 centimetres in diameter and 22 centimetres in height.

 

Low Noise 

Silent! Negligible noise and vibration, often installed under Owner’s or VIP’s beds.

 

Low Power 

High efficiency (>85%) means lower power demand on generators and reduced energy consumption. 

 

Fast 

Immediate ON/OFF mode.

 

Lower Maintenance

Zero maintenance required on electrical motor and gearbox. Remote assistance options for online, real-time diagnostics.

 

Specifications:

https://wavelessmarine.com/stab/ 

 

Dia-log

Waveless products are equipped with CMC Marine’s patented DIA-LOG software, the same used on super and mega yachts.

Underway and Anchor mode are always available.

You can have complete control of your system thanks to a touch screen, designed to have all the features at your fingertips.

 

Features Available:

Flip

FLIP mode allows the STAB fins to rotate 180° while in Anchor mode.

Reduce ”anchor walk” and keep the anchor chain tight and the bow in the wind in any weather condition.

Actual flip angle can be adjusted at commissioning time to account for hull shape and prevent interference with the chain.

 

Night Mode

Reduce STAB power absorption to approximately 60%, while in Anchor mode.

Night mode is useful to limit power demand on generators and extend battery duration when working on the yacht’s DC system.

 

Adaptive 

In Adaptive mode, your STAB system monitors sea conditions and adjusts operation parameters automatically to provide the best stabilization for every condition.

 

Integrated Stabilisation System

CMC Marine’s has established its industry leadership for motion control, through a full range of solutions. Every system is an assembly of the most advanced, robotic-industry standard technologies, made to work with the highest standards of performance, accuracy, fast response, reliability and energy efficiency. All systems can operate independently whenever required, but maximum performance is achieved when they work together, controlled by the same algorithm, processor and motion sensors. Dia-log performs at its best when installed with waveless stabilizers and trim.

Waveless
Stabilis Electra – High Speed System
Stabilis Electra - High Speed System Image

The HS System is an evolution of the SE Stabilis Electra System, optimised for planing yachts that can reach over 24 knots.

The HS system has some notable improvements compared to the previous model, including greater optimisation of the fin profile for better performance and a reduction of the resistance; updated electronics for even faster and more controlled performance in addition to the ability to control integrated systems (for example, steering or intruder) together with the fins.

 

Stabilis Electra HS system advantages

  • For boats faster than 24 knots
  • New fins Shape that ensures better performances by reducing the induced
  • New electronics: Reduced weights with better performance
  • Inertial platform that allows to analyse roll, pitch and yaw data
  • Maximum reliability of mechanics derived from the experience of gained with the many applications of SE system
  • Possibility to control up to 4 axis combining different control surfaces (steering or intruders) with stabilizing fins
  • Platform control development through the interaction of multiple surfaces

 

Specifications
https://www.cmcmarine.com/fin-stabilizers 

CMC MARINE
Stabilis Electra – Long Range System
Stabilis Electra - Long Range System Image

The LR Fin Stablisation System has been optimised for displacement or semi-displacement yachts.

 

Benefits of the Long Range fin stabilizers

Include compact actuators with the same power of the equivalent SE system; better performance; a fin geometry specifically designed for displacement yachts; the possibility to install fins of up to 5 square meters and new electronics with the ability to integrate the controls for up to 8 different systems. The LR range uses a highly accurate inertial detector that detects the Roll, Pitch and Yaw of the yacht which in turn provides the input to the system to provide a very high level of platform stability.

 

CMC Advantages

  • For displacement or semi-displacement boats
  • More compact machines with the same power respect to SE equivalent
  • Possibility of installing larger fins (Increase of cop/power ratio)
  • New electronics: Reduced weights with better performances
  • Fin profile optimized for displacement boats
  • Control platform developed thanks to the possibility to drive 8 control surfaces
  • 3-axis inertial platform
  • Possibility to reduce the sizes installed on board at a lower price
CMC MARINE
Hydraulic Fin Stabilizers
Hydraulic Fin Stabilizers Image

Trac are the world’s largest stabilizer manufacturer and produce both underway and STAR (STabilisation At Rest). 

ABT-TRAC Yacht Stabilizers dramatically improve ride comfort in any sea-state or wave angle. TRAC’s 3-term control detects vessel motion and instantly adjusts fin stabilizer position to counteract roll.

We don’t just sell the equipment; we also back it up with a complete installation, commissioning and maintenance service via our TRAC factory trained technicians.

In marine stabilizers, speed is the key. You must stop Roll before it starts otherwise you end up fighting the vessel’s momentum as well as the forces of the sea, and that’s a losing battle. The lightning-fast reaction time of the TRAC yacht stabilizer is key to its premium performance.

 

TRAC Advantages

Dramatic Yacht Stabilizing Performance

Dramatic is the only word that even comes close to describing the performance of an ABT-TRAC marine stabilizer system compared to any first-generation boat stabilizer. Other boat stabilizing products provide some degree of “roll dampening“ but the ABT-TRAC marine stabilizer virtually eliminates roll altogether!

 

ABT-TRAC Boat Stabilizers Are Fast Acting

Solid state inertial sensors feed TRAC’s control processor with vessel roll and heel angle data in real time. TRAC’s stabilizer fin angle of attack is adjusted over 200 times per second to create roll countering lift the instant it is detected.

 

A Digitally Designed Yacht Stabilizer

The TRAC stabilizer fin was computer designed from the ground up by a nationally recognized hydrodynamics design team. The Stabilizer fin chord shape was optimized to create maximum lift without cavitation at typical cruising speeds. But to give the TRAC fin the lift needed to provide absolute stabilizing performance, a “winglet“ was designed and added to the tip of the fin. The winglet provides a substantial increase in lift while reducing drag at the same time.

 

The TRAC Winglet

A traditional boat stabilizer fin loses a measurable amount of lift out at the tip as water on the high-pressure side wraps around the tip to the low-pressure side. The phenomenon also creates what is called a “wing tip vortex“ which is a major component of drag. The TRAC stabilizer fin winglet provides a barrier to high pressure “wraparound“ thus increasing lift and reducing drag at the same time.“

 

TRAC Stabilizer Easy Touch Screen Access

TRAC Link is an integrated CAN Bus control for TRAC stabilizers, thrusters, and auxiliary hydraulic loads. TRAC Link control allows multiple touch screen panels and thruster control stations to be connected via simple network cables. Thrusters, stabilizers and auxiliary hydraulics can be controlled from the same touch screen. TRAC Link also monitors hydraulic pressure and stabilizer performance. TRAC thrusters can be precisely controlled to manoeuvre the vessel to the dock and hold it there. Dual windlass control is available from the touch screen.

 

Integrated Hydraulics Drive TRAC Marine Stabilizers

A dedicated Integrated Hydraulics System (ABT•TRAC central hydraulic system) provides hydraulic fluid power to the TRAC stabilizer.

 

Space Saving Boat Stabilization System

The TRAC Stabilizer fin actuator is designed with a low profile to minimize installation space. The boat Stabilizer’s larger mounting flange makes actuator installation easier and spreads fin loads into the hull over a greater area.

 

Downloadables:
TRACStar – Zero Speed
TRAC – Product Overview

ABT-TRAC
Tender Chocks
Sliding Tender Chocks
Sliding Tender Chocks Image

Stella Sliding Tender Chocks are a high quality, highly functional piece of equipment for carrying your Jet ski or Tender. 

 

Marine Grade 316 Stainless Steel

Our Dinghy Chocks are built with 316 stainless steel for corrosion resistance. Every piece is machined in-house, and our skilled tradesmen fabricate it all together. These are simple to assemble and make an absolute statement on the back of your yacht!

 

Sliding

The locking pins are designed to keep the tender chocks in place. To slide the chocks out, pull out the pin on each chock and slot it into one of the pre-drilled holes on the opposite end. Push the jet ski or tender out to water or pull it towards the boat ready to get back underway. The rollers on the chocks make this a very easy task! 

 

Removable

Free up space for more recreational activities and ensure the swim platform is free of obstructions! When you do not need to use the Tender Chocks, remove the bolts, lift up the chocks and put them in a safe location until you would like to use them again. 

 

Adjustable

The cork pads can be moved so they are in the perfect position for your Jet ski or Tender. The Tender Chocks are custom-built and can be adjusted to best suit your boat.

 

Easy Loading of Jet Ski and Tenders

If your Stella Tender Chocks are on a hydraulic swim platform simply lower the platform down into the water, float the Jet ski or tender above the chocks and make sure they are lined up. Raise the platform out of the water, ensuring the jet ski or tender is sitting comfortably in the cork pads. 

If you are using a Davit, hook up your jet ski or tender as you normally would, and lift it above the chocks ensuring the Jet ski or Tender is lined up with the cork pads. Slowly lower into the pads. 

 

12 months limited Australian warranty

We offer a 12 months limited warranty on our watermakers. This is an Australian warranty, backed up directly by us, the manufacturer. You won’t have to deal with a different country or through a local agent.

Stella
Water Softener
Portable Water Softener
Portable Water Softener Image

Portable Water Softeners for boats

Stella’s Portable Water Softeners are a water filter and softener system for applications on yachts, boats, cars, caravans and homes. The Stellasoftener removes all water hardness (minerals) from your potable water supply and helps to protect your equipment, plumbing and tanks by eliminating calcium build-up. 

We offer three sizes; each needs to be recharged after approx. 7500/10500/17500 (depending on model) litres of water has been through the unit. Each Stellasoftener is fitted with a flow regulator to provide more accuracy for production and recharging. The flow rate of the 7500 is 11LPM, the 10500 is 16 LPM and the 17500 is 25 LPM.

 

What the kit includes

  • Softener housing,
  • Filter and recharge housing,
  • 1 x 5 micron sediment filter,
  • 2x hoses with click fittings,
  • Flow regulator,
  • Hardness test strips,
  • 25 kg bag of water softener salt for Recharging.

 

Choose your size

Product Dimensions Weight (kg) Code
Stella Softener 10500 228mm x 431mm 12.4 SS75
Stellasoftener 177mm x 889mm 16.6 SS105
Stellasoftener17500 228mm x 889mm 26.0 SS175

 

Additional accessories to ensure longevity

Your Stellasoftener should be checked regularly using the water hardness test strips to ensure your unit is performing prope if necessary, and recharge your unit. This process can be done in 10-15 minutes, Use water softening salt to recharge. 

Product Dimensions Code
Recharge Media Salt crystals for recharging (25kg) SS17
Test Strips Strips to test water quality SS18
Filter 5 Micron Sediment filter ST23

 

 12 months limited Australian warranty

We offer a 12 months limited warranty on our watermakers. This is an Australian warranty, backed up direct by us, the manufacturer. You won’t have to deal with a different country or through a local agent.

Stella
Watermakers
Generation 3 Stella Watermaker
Generation 3 Stella Watermaker Image

Make your own fresh water wherever you drop anchor

When you’re cruising to locations only boats can go for weeks at a time, you need a watermaker that is going to work.

Stella watermakers are reverse osmosis (ro) desalination systems built for the people who prefer to keep it simple on boats. If you put durability and reliability above all else then a Stella Watermaker is the system for you.

We work on a personal, technical advice basis so give us a call on (07) 5665 8071 or press the enquire now button.

 

Marine Engineering company for 20 years

What sets Stella Watermakers apart from any other is the decade of marine engineering experience that predated the first design concept. After many years of experience operating, servicing, selling, and installing all brands and types of watermakers, the team at Stella knew we could build a machine that required less servicing, was simple to operate, and was guaranteed to work when you needed it to.

Since 2011 Stella has been building the best small desalination systems for both marine and land using only high-quality pumps with great warranty reputations, constructed of 316 stainless steel and duplex, no use of proprietary parts, and no unnecessary electronics.

Stella Watermakers combines simplicity with quality components to create a reliable, easy-to-use system that offers real value for money. Whether you are a seasoned superyacht engineer or cruising yachty our modular watermakers are designed for easy installation, operation, and maintenance.

A detailed explanation of our Gen 3 marine watermaker system is below.

 

The Generation 3 Stella Watermaker

 

Gen 3 is a modular watermaker system (separate components, not a large framed box) so they can be fitted wherever there is available space (pictured) and use no electronics, just simple manual control valves.

 

All Stella Watermakers come standard with

1 x Control Panel, 1 x GP motor and high-pressure pump (unless engine drive, see below), 1 x Davey Low-Pressure Pump, Filmtec membranes (1,2 or 3) and housings, 1 x 20 micron and 5-micron pleated filters, 2 x seawater filter housings, 1 x carbon filter, and housing, standard high-pressure hoses and a TDS reader (Everything pictured).

* Autoflush is an optional extra, not everyone wants it though it is the only piece of automation we would recommend here.

 

Stella Manufactures AC or Engine Driven Watermakers

Electric 240VAC

The watermakers for larger powerboats, yachts, and catamarans with a suitable sized AC Genset. Always the first option, easy installation and makes lots of water fast. You will need a minimum 3.5kva (continuously rated) Genset to run our 240VAC electric unit. Output is 80, 160, or 210 litres per hour of water using 1, 2, or 3 standard membranes. Power usage (LP and HP pump) is approx. 12amps when running (without start-up load). For more info download the 240VAC manual at the bottom of this page.

 

Engine Driven

For all marine vessels without a Genset, but with an inboard engine. It’s a very efficient and reliable way of making plenty of water very quickly. You will need a suitable engine with room to fit an engine bracket and pulley system. We have some standard brackets available or custom fabrication is required. Output is 80, 160, or 240 litres per hour of water using 1, 2, or 3 standard membranes. Power usage is approx. 2HP draw from the engine. For more info download the engine drive manual at the bottom of this page.

 

Stella Options

Auto Flush

Makes it easier to maintain your watermaker if you are not making water or on the boat every week to perform a manual flush. All watermaker membranes need to be freshwater flushed after each use and then every 7 days if not pickled for storage to avoid damage to the membrane. Our auto-flush system includes a box with a dual timer and solenoid valve to flush your system with water from your boat’s tank for a few minutes every 7 days.

 

Spares Kit

All the consumables you need for 6-12 months cruising (depending on usage). Includes: 3x 20-micron seawater filters, 3x 5-micron seawater filters, 1x 5-micron charcoal (carbon) filter, 1x 500g pickling solution (for membrane storage), 1x 1lt HP pump oil.

 

Stella Advantages

Simple manual operation, no electronics

We have made it simple to use. You don’t have to study the manual to be able to operate our watermakers. We have removed the electronic automation which usually makes watermakers difficult to use, unreliable, and even harder to fix. Just two valves on the control panel and a knob to wind up the pressure. Comes with a laminated “Quick Start-Up Sheet“ with step-by-step instructions so anyone can make water quickly.

 

Super performance and reliability

Our watermakers make a lot of water fast! 80-240 liters per hour with our AC and engine-driven units. When it comes to making water ”the quicker the better” so you don’t have to do it every day or for long periods. With simplicity and quality components with a lack of electronics comes unequaled reliability, critical when cruising.

 

Quality 316 stainless steel components

From our high-pressure pump to our membrane housing end caps and fittings, all-metal components are 316-grade stainless steel (or Duplex), designed for a harsh marine environment. We appreciate quality and have sourced the best components from around the world for our watermakers. This combination of quality components and a simple design creates a very reliable, easy-to-use system.

 

Low maintenance and running costs

A simpler, better-engineered watermaker with fewer components means less maintenance is required. Running costs are minimal, and will depend on how often it’s used and how well it’s maintained. Consumables such as membranes, filters, pickling solution, and pump oil are all standard items available from us or worldwide.

 

Modular design for easy installation

Gen 3 Watermakers are modular (separate components not a large framed box) so can be fitted wherever there is available space. The Control Panel can be mounted with other components or remotely in a bathroom cabinet or cockpit locker.

 

80-240 litres of water per hour (expandable)

Our AC and engine-driven units make lots of water very quickly. Our standard high-pressure pumps will run up to 3 membranes, so If your water requirements change you can always just add another membrane to increase water production.

 

No flashing lights or failing circuit boards

Fully automated watermakers use a multitude of electronics including a microprocessor, circuit boards, solenoid valves, timers, relays, pressure switches, led screens, flashing lights, and salinity probes. Great when they work, but the cost goes up and reliability goes down! Any experienced cruiser knows that the simpler the equipment the better. Even seasoned superyacht engineers prefer our watermakers to others with all the bells and whistles.

 

No high maintenance energy recovery pumps

We don’t use complicated energy recovery pumps with lots of o-rings and poppet valves that create more maintenance. We use industry-standard 316 stainless steel triplex high-pressure pumps with solid ceramic plungers, designed specifically for marine desalination. Parts and service for these pumps are available worldwide.

 

No cracking plastic membrane end plugs

We don’t use plastic membrane housing end caps; they have a habit of cracking causing dangerous high-pressure leaks. We use quality Duplex 2205 stainless steel end caps for high strength and corrosion resistance.

 

High-Quality High-pressure hoses

We don’t use cheap and nasty high-pressure hoses; they chafe easily from pump or engine vibration and can split or burst causing injury and damage. We use the highest quality hoses we can find with Quality 316 Stainless fittings. The hoses are protected with an anti-wear wrap to help protect and prolong the life of the hoses.

 

No proprietary components

We don’t use special Stella manufactured components such as filters or membranes that force you to buy replacements from us and cost “an arm and a leg“. We use industry-standard components that you can easily find worldwide. If you are in a remote area we can ship parts fast if required or help you find them locally.

 

Best after sales service and backup

We are not just a sales company; we design and manufacture our watermakers so can offer the best service and backup. We have a marine engineering division who services all brands of watermakers and can help with all troubleshooting queries.

 

Installation and servicing if required

We don’t just sell the equipment, we also offer a complete installation, commissioning and maintenance service via our marine engineering division if required. Our 30-page Installation & Operation Manual supplied with each watermaker provides simple step by step instructions with diagrams of all components making installation easy for the DIY boat owner, boat builder or contracted installer. The manual includes an easy-to-understand system flow diagram and detailed procedures for operation and maintenance of your watermaker.

 

24 months limited Australian warranty

We offer a 24-month limited warranty on our watermakers. This is an Australian warranty, backed up direct by us the manufacturer. You won’t have to deal with a different country or through a local agent.

 

Proudly designed and manufactured in Australia

Not only is our water maker the best value for money system available, it is also Australian-made and comes with an Australian warranty and back-up. Support your local marine industry and buy an Australian-made watermaker.

 

Real Value for Money

The combination of a simple reliable design, quality components and high-water output make Stella Watermakers real value for money and include free Australia wide (metro) delivery.

 

The manual is available for you to download as well as a brochure for keepsake. Our team are experts in desalination and can generally answer any question over the phone – Call anytime.

 

To enquire through email either email us at info@stellamarine.com.au or press the red ‘enquire now’ button.

Trade and export enquiries welcome!

Downloadables:

Manual Generation 3 – Engine Drive CE
Manual Generation 3 – 240VAC CE

Stella
Land Based Stella Watermaker
Land Based Stella Watermaker Image

Small-scale desalination units for Bore, Brackish or Seawater

 

Turn Salty/saline water into the world’s best fresh water with a Land-Based Stella Watermaker. Built off the back of the Gen 3, Stella’s Land-Based Stella Watermakers take all the best bits of a Gen 3 system and put it into a framed kit ready for plug and play use. Land-Based systems are small-scale desalination plants that produce clear fresh water for livestock, crop spraying, horticulture, and domestic uses. 

We supply our land-based desalination units to farmers, business owners, and rural communities across Australia and throughout the South Pacific. The watermakers make 240+ lph. if you need a system more than 240 lph then contact our staff by pressing the red \\”enquire now\\” button, we will design a system for you.

Our framed, portable systems are the solution for your freshwater needs.

 

The Land-Based Stella Watermaker System

Is a manual system that uses only heavy-duty parts, making it extremely durable and able to withstand the harshest of environments. Every Land-Based Stella Watermaker comes pre-plumbed ready for Plug & Play use. Simply connect the \\”water source inlet\\” and \\”to tank\\” hoses and plug in the pumps to begin making water. Stella Watermakers are an incredibly system designed to help Aussie farmers.

 

Pre Filters 

We use 10/4 inch pleated filters for our Land-Based and Aquarius systems. This is so the pre-filters last longer and doesn’t need to be changed as regularly as the 10/2.5 inch. 

 

Membranes

Do you need seawater or brackish water membranes? Speak to one of our staff members who will help you design your system and ensure you are set up with the right membranes. 

 

Stella Options

Auto Flush

Makes it easier to maintain your watermaker. Optional automatic freshwater flushing system which includes a box with dual timer and solenoid valve to flush your system with water from your fresh water tank for a few minutes every 7 days. All watermaker membranes need to be freshwater flushed after each use and then every 7 days if not pickled for storage, to avoid damage to the membrane.

 

Jumbo Spares Kit

All the consumables you need for 6-12 months usage (depending on usage). Includes: 3x 10/4 inch 20-micron seawater filters, 3x 10/4 inch 05-micron seawater filters, 1x 10/2.5 inch 05-micron charcoal (carbon) filter, 1x 500g pickling solution (for membrane storage), 1x 1lt HP pump oil.

 

Stella Advantages

Simple manual operation, no electronics

We have made it simple to use. You don’t have to study the manual to be able to operate our watermakers. We have removed the electronic automation which makes watermakers difficult to use, unreliable and even harder to fix. Just two valves on the control panel and a knob to wind up the pressure. Comes with a laminated ”Quick Start-Up Sheet” with step-by-step instructions so anyone can make water quickly.

 

Super performance and reliability

Our watermakers make a lot of water fast! 80-240 litres per hour with our AC units. When it comes to making water ”the quicker the better” so you don’t have to do it every day or for long periods. With the simple, quality components and lack of electronics comes unequalled reliability, critical when in water-scarce areas.

 

Quality 316 stainless steel components

From our high-pressure pump to our membrane housing end caps and fittings, all-metal components are 316-grade stainless steel (or Duplex), designed for a harsh marine environment. We appreciate quality and have sourced the best components from around the world for our watermakers. 

 

Low maintenance and running costs

A simpler, better-engineered watermaker with fewer components means less maintenance is required. Running costs are minimal but will depend on how often it’s used and how well it’s maintained. Consumables such as membranes, filters, pickling solutions, and pump oil are all standard items available from us or worldwide.

 

Plug and Play design for easy installation

All Land-Based Stella Watermakers are delivered as a framed kit with all pre-plumbing connected. This means the systems can be fitted wherever there is available space, just hook up the hoses to the water source and tank, plug in the electrical cords for the pump and turn it on. 

 

No flashing lights or failing circuit boards

Fully automated watermakers use a multitude of electronics including a microprocessor, circuit boards, solenoid valves, timers, relays, pressure switches, led screens, flashing lights and salinity probes. Great when they work, but the cost goes up and reliability goes down! Any experienced cruiser knows that the simpler the equipment the better. Even seasoned superyacht engineers prefer our watermakers to others with all the ”bells and whistles”.

 

No high maintenance energy recovery pumps

We don’t use complicated energy recovery pumps with lots of O-rings and poppet valves that create more maintenance. We use industry-standard 316 stainless steel triplex high-pressure pumps with solid ceramic plungers, designed specifically for marine desalination. Parts and services for these pumps are available worldwide.

 

No cracking plastic membrane end plugs

We don’t use plastic membrane housing end caps; they have a habit of cracking causing dangerous high-pressure leaks. We use quality Duplex 2205 stainless steel end caps for high strength and corrosion resistance.

 

High-Quality High-pressure hoses

We don’t use cheap and nasty high-pressure hoses; they chafe easily from pump or engine vibration and can split or burst to cause injury and damage. We use the highest quality hoses we can find with Quality 316 Stainless fittings. The hoses are protected with an anti-wear wrap to help protect and prolong the life of the hoses.

 

No proprietary components

We don’t use special manufactured components such as filters or membranes that force you to buy replacements from us and cost ”an arm and a leg”. We use industry standard components that you can easily find worldwide. If you are in a remote area, we can ship parts fast if required or help you find them locally.

 

Best after-sales service and backup

We are not just a sales company; we design and manufacture our watermakers so can offer the best service and backup. We have a marine engineering division that services all brands of watermakers and can help with all troubleshooting queries.

 

Installation and servicing if required

Our 30-page Installation & Operation Manual supplied with each watermaker provides simple step by step instructions with diagrams of all components making installation easy. The manual includes an easy-to-understand system flow diagram and detailed procedures for operation and maintenance of your watermaker. 

 

24 months limited Australian warranty

We offer a 24-month limited warranty on our watermakers. This is an Australian warranty, backed up direct by us the manufacturer. You won’t have to deal with a different country or through a local agent.

 

Proudly designed and manufactured in Australia

Not only is our watermaker the best value for money system available, it is also Australian made and comes with an Australian warranty and back-up. Support your local marine industry and buy an Australian made watermaker.

 

Real Value for Money

The combination of a simple reliable design, quality components and high-water output make Stella Watermakers real value for money.

Trade and export enquiries welcome!

For Stella Watermaker specifications and dimensions please enquire.

Stella
Aquarius Automatic Watermaker
Aquarius Automatic Watermaker Image

Aquarius is the world’s simplest fully automatic watermaker, unrivalled in its simplicity, reliability and usability. We have worked hard to not over complicate this system. 

Aquarius is the perfect solution if you are looking for a watermaker that will take care of itself. Modular or compact, Aquarius runs its own start up and shut off sequence, has high pressure and low-pressure factory pre-set shutdown safety settings, it auto-flushes like clockwork, and all you need to do is press start and stop on the remote installed in your cabin. 

Engineered to perform, Aquarius does not need extra operator attention. Once past its commissioning stage, your fresh-water needs will be one less thing to worry about.

 

The Stella Watermakers Concept

Stella Watermakers are the result of many years of experience operating, servicing, selling and installing all brands and types of watermakers (reverse osmosis desalination plants). Proudly designed and manufactured in Australia, Stella Watermakers combine simplicity with quality components to create a reliable, easy to use system that offers real value for money. Whether you are a seasoned superyacht engineer or cruising yachtie our modular watermakers are designed for easy installation, operation and maintenance.

 

Stella Advantages

We’ve made the best possible fully-automatic watermaker we can.

Fully automated watermakers use a multitude of electronics including a microprocessor, circuit boards, solenoid valves, timers, relays, pressure switches, led screens, flashing lights and salinity probes. We believe we have engineered our control panel and electrical box to give you the best possible outcome. A watermaker that takes care of itself, besides the regular maintenance required. 

 

Simple automation 

We have made it simple to use. Install the remote control anywhere in the cabin and you have all you need to make water with the push of a button. 

Press start on the remote and Aquarius will run its own start-up sequence and begin making water shortly. Once the tank is full Press Stop on the remote and Aquarius will run its own shut-down sequence, including a 3-minute auto-flush. Finally once the auto-flush is complete, Aquarius will automatically switch itself into standby mode – awaiting the next time you press Start. 

With simplicity and quality comes unequalled reliability, critical when cruising.

 

Super performance and reliability

Our watermakers make a lot of water fast! 80-240 litres per hour with our AC and engine driven units. When it comes to making water ”the quicker the better” so you don’t have to do it every day or for long periods. 

 

Quality 316 stainless steel components

From our high pressure pump to our membrane housing end caps and fittings, all metal components are 316 grade stainless steel (or Duplex), designed for the harshest marine conditions. We understand the importance of quality and have sourced the best components from around the world to ensure our watermakers are of the best standard. This combination of quality components and a simple design creates a very reliable, easy to use system.

 

Low maintenance and running costs

A simpler, better engineered watermaker with less components means less maintenance is required. Running costs are minimal, but it will ultimately depend on how often it’s used and how well it’s maintained. Consumables such as membranes, filters, pickling solution and pump oil are all standard items available directly from us at Stella or your local marine chandlery.

 

Modular design for easy installation

Aquarius is modular (separate components not a large framed box) so can be fitted wherever there is available space. The Control Panel can be mounted with other components or remotely in a bathroom cabinet or cockpit locker.

 

No high maintenance energy recovery pumps

We use industry standard 316 stainless steel triplex high pressure pumps with solid ceramic plungers, designed specifically for marine desalination. Parts and service for these pumps are available worldwide.

 

No cracking plastic membrane end plugs

We use quality Duplex 2205 stainless steel end caps for high strength and corrosion resistance. 

 

High Quality High pressure hoses

We use the highest quality hoses we can find with Quality 316 Stainless fittings. The hoses are protected with a anti-wear wrap to help protect and prolong the life of the hoses.

 

No proprietary components

We use industry standard components that you can easily find worldwide. If you are in a remote area we can ship parts fast if required or help you source them locally.

 

Stella Options

All the consumables you need for 6-12 months cruising (depending on usage). Includes: 3x 20 micron seawater filters, 3x 5 micron seawater filters, 1x 5 micron charcoal (carbon) filter, 1x 500g pickling solution (for membrane storage), 1x 1lt HP pump oil.

 

Best after sales service and backup

We are not just a sales company, we design and manufacture our watermakers in-house, so we  can offer the best service and backup. We have a marine engineering division who services all brands of watermakers and can help with all troubleshooting queries.

 

Installation and servicing if required

We don’t just sell the equipment, we also offer a complete installation, commissioning and maintenance service via our marine engineering division if required. Our Installation & Operation Manual supplied with each watermaker provides simple step by step instructions with diagrams of all components making installation easy for the DIY boat owner, boat builder or contracted installer. The manual includes an easy to understand system flow diagram and detailed procedures for operation and maintenance of your watermaker. 

 

24 months limited Australian warranty

We offer a 24 months limited warranty on our watermakers. This is an Australian warranty, backed up direct by us, the manufacturer. You won’t have to deal with a different country or through a local agent.

 

Proudly designed and manufactured in Australia

Not only is our watermaker the best value for money system available, it is also Australian made and comes with an Australian warranty and back-up. Support your local marine industry and buy an Australian made watermaker.

 

Real Value for Money

The combination of a simple reliable design, quality components and high water output make Stella Watermakers real value for money.

Trade and export enquiries welcome!

For Stella Watermaker specifications and dimensions please enquire with our team today.

Please include your best contact number so we can call you back to discuss.

Stella
Wind Generators
Rutland 1200 Windcharger
Rutland 1200 Windcharger Image

The Rutland 1200 is the new generation of turbine designed for users seeking higher generating capacity on board yachts and in offgrid locations. The Rutland 1200 elegantly combines a number of high tech features focused on quiet operation, low wind speed performance and high power delivery up to 500W.

 

Design Features

  • Unique Tri-namic Profile Blades The most advanced Marlec designed Tri-namic Blade brings together low wind speed start up with high wind speed power performance and almost silent running across all wind speeds.
  • 3 Phase AC power delivered from the turbine to the controller minimises voltage drop on long cable runs
  • The low friction generator responds rapidly to wind speed changes and its inertia drives the turbine on between gusts to capture more energy
  • Power optimising Maximum Power Point Tracking (MPPT) boosts the turbine’s output
  • Marine grade stainless steel and aluminium are combined with modern, durable but lightweight materials to give a high quality build and finish.

 

Rutland Advantages

Rutland’s low wind speed start up is unrivalled. The highly efficient blade and generator designs deliver charge into your batteries long before many other turbines are picking up. Overall that’s more power to you!

Marlec are innovators, leading the way in their industry on aerodynamic, electronics and low friction generator designs to deliver modern, durable wind turbines that have continued to stand the test of time.

They keep it simple and user friendly for our tens of thousands of users worldwide. Eg the blades have a positive one-way-only fit so there’s no need for the user to align with other components.

 

Quietly – their fully integrated product designs result in quiet operation so you can liveaboard without disturbance from noisy blades.

Reliably – with over 100,000 units sold worldwide, Rutland turbines have been proven time and again on land and sea. The UK based factory is manufactured under ISO9002 operating standards and their testing parameters are rigorous.

Effortlessly – just a gentle breeze is all it takes to start delivering charge into your batteries.  The Rutland 1200 highly efficient blades and low inertia generator capture the free and abundant energy in the wind.

Environmentally Friendly – be at one with the sea and use the natural resources of the wind and sun to fulfil your energy needs without costing the earth.

 

Controller Specifications:

  • Hybrid control to combine Rutland 1200 wind turbine with up to 20A of solar panels
  • Dual charging capability to 2 separate battery banks
  • MPPT on both wind turbine and solar panel inputs to maximise both energy sources.  Enables connection of high voltage solar panels.
  • Pulse Width Modulation charge control for multi-stage charging ensures fully charged and maintained batteries.
  • Automatic turbine speed reduction as batteries reach capacity, resumes as batteries deplete.
  • Manual shutdown switches for wind and solar inputs
  • LED charge and battery condition   indicators as standard.
  • Remote digital display optional. Connect with RJ232

 

Getting Your Rutland Up and Running

The Rutland 1200 includes the controller needed for battery charging up to 2 separate battery banks.  It is a purpose designed wind and solar energy hybrid controller accepting inputs from the Rutland 1200 and up to 20A of solar panels.

Select the model required, 12V or 24V. The regulator should be located within a 1.5m cable run of the battery bank.

An optional remote digital display is available.

 

Marine Mounting Pole – a Rutland Marine Mounting Pole and separately supplied Stays Kit give a professional finish to your installation OR make your own to suit your own based on tube specified at 41mm internal and 48mm external diameters.

Cables & Connectors – select between 2.5mm and 4mm 3 core cable. Permanent battery connections are recommended.

Batteries – deep cycle gel or AGM types are recommended with renewable energy systems. A good quality range is available from Marlec.

 

Downloadables:
Rutland 1200 Brochure
Rutland 1200 Manual -D Part 1
Rutland 1200 Manual -D.1 Part 2

Marlec
914i Wind Charger
914i Wind Charger Image

The Rutland 914i was developed following the long success of the 913 model. Its 30% increased generating capacity, from the same diameter turbine, is achieved through advanced maximum power point tracking (MPPT) electronics, delivering even more energy from the wind. Ideal for liveaboard and weekend yachting boats from 10 meters.

The Rutland 914i punches well above its size for power, rivalling the claimed outputs of larger turbines, owing to its built-in MPPT technology. This continuously matches the turbine speed and generator to their optimum performance to deliver more ampere hours into your battery…and a by-product of this optimised efficiency is a virtually silent wind turbine!

 

Materials

Marlec have innovated their field by introducing light weight but robust high-density nylon and glass reinforced materials that are UV stable alongside marine grade aluminium, stainless steel, sealed for life bearings and other carefully selected and precision worked materials in the UK factory.

 

Why Rutland?

Rutland’s low wind speed start up is unrivalled. The highly efficient blade and generator designs deliver charge into your batteries long before many other turbines are picking up. Overall that’s more power to you!

Marlec are innovators, leading the way in their industry on aerodynamic, electronics and low friction generator designs to deliver modern, durable wind turbines that have continued to stand the test of time.

They keep it simple and user friendly for our tens of thousands of users worldwide. Eg the blades have a positive one-way-only fit so there’s no need for the user to align with other components.

Quietly – their fully integrated product designs result in quiet operation so you can liveaboard without disturbance from noisy blades.

Reliably – with over 100,000 units sold worldwide, Rutland turbines have been proven time and again on land and sea. The UK based factory is manufactured under ISO9002 operating standards and their testing parameters are rigorous.

Effortlessly – just a gentle breeze is all it takes to start delivering charge into your batteries.  The Rutland 1200 highly efficient blades and low inertia generator capture the free and abundant energy in the wind.

Environmentally Friendly – be at one with the sea and use the natural resources of the wind and sun to fulfil your energy needs without costing the earth.

 

Getting Your Rutland Up and Running

Choose the right Rutland Windcharger for you and then select: 

A Rutland Marine Mounting Pole and separately supplied Stays Kit give a professional nish to your installation OR make your \\\\ own to suit using the tube sizes specified:

Rutland 914i – 41mm internal diameter, maximum external 48mm

Rutland 504 – 31.7mm internal diameter, maximum external 38mm

 

Charge Regulator

Choose one of the latest technology PWM (pulse width modulation) regulators available for single or dual battery charging. Both types undertake multistage charging and include temperature compensation to maximise the battery capacity. As the batteries achieve full charge these regulators automatically and progressively brake the blades minimising unnecessary wear on the wind turbine. An input position for solar panels up to maximum capacity of 160W (@25°C) is included. Shutdown switch to isolate wind and solar charging from the battery is built in. The regulator should be located within a 1.5m cable run of the battery ban.

 

Downloadables:
Rutland Marine Brochure
Rutland 914i Manual C

Marlec
504 Wind Generator
504 Wind Generator Image

The Rutland 504 model’s safety turbine makes it ideal for trickle charging on board where space is at a premium. Weekend yachts up to 10m and mobile users such as caravanners will appreciate its compact size and weight for ease of handling and portability. Typically suited for batteries up to 150Ah capacity.

 

Materials

Marlec have innovated their field by introducing light weight but robust high-density nylon and glass reinforced materials that are UV stable alongside marine grade aluminium, stainless steel, sealed for life bearings and other carefully selected and precision worked materials in the UK factory.

 

Why Rutland?

Rutland’s low wind speed start up is unrivalled. The highly efficient blade and generator designs deliver charge into your batteries long before many other turbines are picking up. Overall that’s more power to you!

Marlec are innovators, leading the way in their industry on aerodynamic, electronics and low friction generator designs to deliver modern, durable wind turbines that have continued to stand the test of time.

They keep it simple and user friendly for our tens of thousands of users worldwide. Eg the blades have a positive one-way-only fit so there’s no need for the user to align with other components.

Quietly – their fully integrated product designs result in quiet operation so you can liveaboard without disturbance from noisy blades.

Reliably – with over 100,000 units sold worldwide, Rutland turbines have been proven time and again on land and sea. The UK based factory is manufactured under ISO9002 operating standards and their testing parameters are rigorous.

Effortlessly – just a gentle breeze is all it takes to start delivering charge into your batteries.  The Rutland 1200 highly efficient blades and low inertia generator capture the free and abundant energy in the wind.

Environmentally Friendly – be at one with the sea and use the natural resources of the wind and sun to fulfil your energy needs without costing the earth.

 

Getting Your Rutland Up and Running

Choose the right Rutland Windcharger for you and then select: 

A Rutland Marine Mounting Pole and separately supplied Stays Kit give a professional nish to your installation OR make your \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ own to suit using the tube sizes specified:

Rutland 914i – 41mm internal diameter, maximum external 48mm

Rutland 504 – 31.7mm internal diameter, maximum external 38mm

 

Charge Regulator

Choose one of the latest technology PWM (pulse width modulation) regulators available for single or dual battery charging. Both types undertake multistage charging and include temperature compensation to maximise the battery capacity. As the batteries achieve full charge these regulators automatically and progressively brake the blades minimising unnecessary wear on the wind turbine. An input position for solar panels up to maximum capacity of 160W (@25°C) is included. Shutdown switch to isolate wind and solar charging from the battery is built in. The regulator should be located within a 1.5m cable run of the battery ban.

 

Downloadables:
Rutland Charge Controllers Stella
Rutland 504 – efurl Manual C
Rutland Marine Brochure

Marlec
Driveline
Hydraulic Get Home Drive
Hydraulic Get Home Drive Image

The Trac Get Home Drive is a gearbox which is mounted onto your propeller shaft, it is hydraulically driven and designed to be a backup form of propulsion should you lose your main engine.

Driven from your vessel’s generator or alternate engine, hydraulic power is directed to your Get Home Drive, providing you with propulsion either forward or reverse for cruising or manoeuvring. As a continuous duty drive, controlled from a remote panel in the pilot house, the Trac Get Home Drive is a life saver.

Offering superior speed flexibility, we have used an exclusive split case design to allow us to change the gear set ratio and hydraulic motor without the need to remove the unit from the vessel, a huge time and cost saving feature. When not in use, the hydraulic motor is completely disconnected from the gearing, reducing wear, heat generation and drag.

Gear lubrication is achieved via a simple oil sump splash design, making the Get Home Drive robust and reliable, providing that peace of mind when you really need it.

 

Features:

  • Fully self-contained unit that is remotely engaged from the pilot house
  • Can be incorporated into all Trac Integrated Hydraulic systems
  • Flexible gear ratios available to match your vesselSuitable for propeller shafts ranging from 2“ to 4“
  • Easily installs over the shaft, no cutting or machining required
  • Continuous rated gear drive, no belt or chainsSpring loaded actuator, ensures accidental engagement cannot occur 
  • Low maintenance
ABT-TRAC
Marine Chairs
Navigator Flybridge
Navigator Flybridge Image

The Navigator Flybridge Seat.

Designed for open water use, the Navigator Flybridge Seat is covered in Marine Grade Vinyl (or custom materials on request).
Navigator seats are available with or without headrests. Both options will look great on board your boat, allowing you to arrive at your destination in style, comfortable and relaxed. Those who don’t travel in Navigators will envy you!

According to your needs, the Flybridge Seat can be mounted on pedestals, swivel bases, or sliding bases.
Navigator Seats feature stainless steel frames with an adjustable backrest, moveable armrests, removable headrests, and the standard sports flip up.

Navigator Flybridge Seats are upholstered in a pliable, hardwearing, UV-resistant vinyl in a multitude of colours and trims from the Navigator fabric collection.

Compact Helm
Compact Helm Image

The Navigator Compact Seat.

All the usual Navigator features in a more compact version. This seat provides excellent ergonomic comfort and navigation safety.

Specifically designed for smaller boats where there is limited space at the helm or if you need a lower backrest to see what is behind you easily. The Compact Helm is the seat for you!

Featuring stainless steel frames with an adjustable backrest, moveable armrests, removable headrests, and the standard sports flip up.
The Compact Helm can be covered in our own UltraFabric, or Marine Grade Vinyl. They are upholstered in a pliable, hardwearing, UV-resistant vinyl in a multitude of colours and trims from the Navigator fabric collection.
According to your preference, the Compact Helm Seat can be mounted on pedestals, swivel bases, or sliding bases.

Air Conditioning
Self Contained Marine Air-conditioning Units Image
Self Contained Marine Air-conditioning Units
  Seawater cooled self-contained unit The Stellair range is suitable for all kinds of small and medium-sized yachts, high-speed passenger ships, fishing boats and some working ships. This air conditi… Read More
Stellair
Split System Marine Air-conditioning Units Image
Split System Marine Air-conditioning Units
An incredibly robust and reliable marine air-conditioning system built to last in the harsh marine environment. Corrosion resistant, light weight and quiet, these are the most ideal systems to have installe… Read More
Stellair
Chilled Water Plant Marine Air-conditioning Image
Chilled Water Plant Marine Air-conditioning
Stellair Chilled Water Plants are high-capacity modular chiller units designed for large pleasure yachts and commercial vessels. The System is made up of several chiller modules with the same capacity, cool… Read More
Stellair
Air Treatment
TEAgel Image
TEAgel
When used in ventilation systems, boats, vehicles, RV’s, rooms, closets/lockers, and even the old gym bag, TEAgel®™ will neutralize and eliminate odors as well as provide long lasting freshness…. Read More
Trac Ecological
Gelair Air Conditioning Blocks Image
Gelair Air Conditioning Blocks
What do Gelair™ Air Conditioning Blocks do? Gelair™ Air Conditioning Blocks stop the spread of invisible mould, bacteria and viruses by slowly releasing Pure Tea Tree Oil vapor in high vol… Read More
Gelair
Gelair Health-e SPLIT Image
Gelair Health-e SPLIT
What is Health-e SPLIT? Gelair™ Health-e SPLIT is used in medium volume, medium flow split or reverse air conditioning systems to sterilise and sanitise the entire air conditioning system an… Read More
Gelair
Bow Thrusters
QS Seamaster Bow and Stern Thrusters Image
QS Seamaster Bow and Stern Thrusters
Designed for the most demanding yachtsman, developed together with boat builders.  QS Seamaster has developed a complete and advanced line of DC, brushless, AC and hydraulic electric thruster… Read More
QS Seamaster Bow & Stern Thrusters.
Craftsman Bow Thrusters Image
Craftsman Bow Thrusters
Bow and stern thrusters have become an important device when moving at low speed. It makes manoeuvring easier, safer and quicker.   Craftsman Marine thruster benefits… Read More
Craftsman Marine
ABT TRAC - HYDRAULIC BOW THRUSTERS Image
ABT TRAC – HYDRAULIC BOW THRUSTERS
The Hardest Pushing Boat Thrusters Ever Built ABT TRAC bow and stern thrusters generate more thrust per horsepower than any other boat thruster on the market. One word to describe ABT TRAC s… Read More
ABT-TRAC
Integrated Hydraulic Systems Image
Integrated Hydraulic Systems
ABT-TRAC manufactures advanced integrated hydraulic systems that not only power the ABT-TRAC range of Thrusters and Stabilizers, but also included ancillary equipment such as capstans, windlasses, cranes, g… Read More
ABT-TRAC
Dualis Thruster Range Image
Dualis Thruster Range
Dualis Electra Bow Thrusters The electric bow thruster with a high thrust/power ratio and compact installation size you’ve been looking for – Dualis Electra by CMC Marine. … Read More
CMC Marine
Descalers and Cleaners
Barnacle Buster Concentrate Image
Barnacle Buster Concentrate
Engine overheating? A/C not cooling? Clogged pipes? Use Barnacle Buster™   What is Barnacle Buster? … Read More
Trac Ecological
Descaler Concentrate Image
Descaler Concentrate
Descaler removes scale from fresh and brackish water applications.   T… Read More
Trac Ecological
GreenClean Coil Cleaner Image
GreenClean Coil Cleaner
GreenClean Coil Cleaner®™ is a fast-acting coil cleaner that will penetrate deep within the coil removing years of caked on sediment. This unique non-foaming … Read More
Trac Ecological
PSR Image
PSR
Use PSR to remove hard water stains, lime scale, rust, or any other mineral based scale deposits from your potable freshwater system.   What is… Read More
Trac Ecological
Sew Clean Image
Sew Clean
Eliminate problematic clogs and odours with Sew Clean®™   Unclog black water systems … Read More
Trac Ecological
Hydraulic Swim Platforms
Hydraulic Swim Platforms for Yachts Image
Hydraulic Swim Platforms for Yachts
Australia’s Strongest Range of Hydraulic Swim Platforms Patented Technology and Precision Engineering make Stella Hydraulic Swim platforms the best Hydraulic Swim Platforms of their kind…. Read More
Stella
Marine Chairs
Navigator Flybridge Image
Navigator Flybridge
The Navigator Flybridge Seat. Designed for open water use, the Navigator Flybridge Seat is covered in Marine Grade Vinyl (or c… Read More
Compact Helm Image
Compact Helm
The Navigator Compact Seat. All the usual Navigator features in a more compact version. This seat provides excellent ergonomic comfort and navigation safety. Specifically … Read More
Marine Sewage Treatment
Marine Sewage Treatment System Image
Marine Sewage Treatment System
Treat the black water on your vessel with BLUE SEA With BLUE SEA it is now possible to discharge wastewater directly into the sea with full respect for the environment and compliance with curr… Read More
Selmar Technologies
Marine Toilets
Luxury Marine Toilets Image
Luxury Marine Toilets
The technical features integrated into every Planus marine toilet are what set them apart from any other in the marketplace. The pump has an 80 meter vertical and 8-meter head – you are not restricted by … Read More
Planus
Marine Wipers
Marine Windscreen Wipers Image
Marine Windscreen Wipers
Windscreen Wipers, Blades & Motors for Boats Wipers designed for use in all marine environments. Exalto produces the world’s best professiona… Read More
Exalto
Rope Cutters
Rope and Line Cutter Image
Rope and Line Cutter
The revolutionary quicKutter© system eliminates rope and line problems.  The system has no moving parts to wear out and is easy to install.    … Read More
quicKutter
Shaft and Rudder Bearings
Shaft and Rudder Bearings Image
Shaft and Rudder Bearings
Maritex Bearings are purpose made for seawater and uniquely designed for the dual purposes of water lubricated hydro-dynamic high speed rotating shafts as well as completely self-lubricating slow speed appl… Read More
Maritex
Stabilizers
STAB Image
STAB
Waveless is the new line of ultracompact electric fin stabilizers designed for boats of 12 meters (40 ft) in length and up, offering STAB stabilizer models and TRIM intruder models. Same quality and perform… Read More
Waveless
Stabilis Electra - High Speed System Image
Stabilis Electra – High Speed System
The HS System is an evolution of the SE Stabilis Electra System, optimised for planing yachts that can reach over 24 knots. The HS system has some notable improv… Read More
CMC MARINE
Stabilis Electra - Long Range System Image
Stabilis Electra – Long Range System
The LR Fin Stablisation System has been optimised for displacement or semi-displacement yachts.   Benefits of the Long Range fin stabilizers … Read More
CMC MARINE
Hydraulic Fin Stabilizers Image
Hydraulic Fin Stabilizers
Trac are the world’s largest stabilizer manufacturer and produce both underway and STAR (STabilisation At Rest).  ABT-TRAC Yacht Stabilizers dramatically impr… Read More
ABT-TRAC
Tender Chocks
Sliding Tender Chocks Image
Sliding Tender Chocks
Stella Sliding Tender Chocks are a high quality, highly functional piece of equipment for carrying your Jet ski or Tender.    Marine Grade 316 Stainless Steel … Read More
Stella
Water Softener
Portable Water Softener Image
Portable Water Softener
Portable Water Softeners for boats Stella’s Portable Water Softeners are a water filter and softener system for applications on yachts, boats, cars, caravans and homes. The Stellasoftener re… Read More
Stella
Watermakers
Generation 3 Stella Watermaker Image
Generation 3 Stella Watermaker
Make your own fresh water wherever you drop anchor When you’re cruising to locations only boats can go for weeks at a time, you need a watermaker that is going to work. … Read More
Stella
Land Based Stella Watermaker Image
Land Based Stella Watermaker
Small-scale desalination units for Bore, Brackish or Seawater   Turn Salty/saline water into the world’s best fresh water with a Land-Based Stell… Read More
Stella
Aquarius Automatic Watermaker Image
Aquarius Automatic Watermaker
Aquarius is the world’s simplest fully automatic watermaker, unrivalled in its simplicity, reliability and usability. We have worked hard to not over complicate this … Read More
Stella
Wind Generators
Rutland 1200 Windcharger Image
Rutland 1200 Windcharger
The Rutland 1200 is the new generation of turbine designed for users seeking higher generating capacity on board yachts and in offgrid locations. The Rutland 1200 elegantly combines a number of high tech fe… Read More
Marlec
914i Wind Charger Image
914i Wind Charger
The Rutland 914i was developed following the long success of the 913 model. Its 30% increased generating capacity, from the same diameter turbine, is achieved through advanced maximum power point tracking (… Read More
Marlec
504 Wind Generator Image
504 Wind Generator
The Rutland 504 model’s safety turbine makes it ideal for trickle charging on board where space is at a premium. Weekend yachts up to 10m and mobile users such as caravanners will appreciate its compact s… Read More
Marlec
Driveline
Hydraulic Get Home Drive Image
Hydraulic Get Home Drive
The Trac Get Home Drive is a gearbox which is mounted onto your propeller shaft, it is hydraulically driven and designed to be a backup form of propulsion should you lose your main engine. … Read More
ABT-TRAC
Marine Chairs
Navigator Flybridge Image
Navigator Flybridge
The Navigator Flybridge Seat. Designed for open water use, the Navigator Flybridge Seat is covered in Marine Grade Vinyl (or c… Read More
Compact Helm Image
Compact Helm
The Navigator Compact Seat. All the usual Navigator features in a more compact version. This seat provides excellent ergonomic comfort and navigation safety. Specifically … Read More

Proudly Partnered With

Have a question?

If you require assistance, get in touch with our friendly team today.