Equipment Store

Seawater cooled self-contained unit

The Stellair range is suitable for all kinds of small and medium-sized yachts, high-speed passenger ships, fishing boats and some working ships. This air conditioning unit is designed by Stella specifically for marine applications.

Features

Every unit is light and compact, these systems are made to be installed under bunks, in cabinetry or any other enclosed space. More freedom at installation is achieved with a rotatable blower that can be adjusted to suit the space. Stella has designed these marine air conditioning units to last with corrosion-resistant features such as titanium tubes and a stainless-steel tray. The tray features drain ports to ensure condensation does not build up.

Stellair air conditioning units are engineered to maximise the performance of R401a refrigerant, which provides more efficient cooling or heating of your space while also being the most environmentally friendly option.

Our range varies in capacity from 3,500 BTU to 36,000 BTU, meaning it will suit all your cooling needs.

Control Panel

A sleek control panel accompanies this system with your choice of either black or chrome. User-friendly controls with an easy-to-read digital screen will help you reach your chosen air regulating mode. The system cools and heats with a 5-speed fan selection.

Digital Control Panel Features

• Cool mode, Heat Mode, Fan Mode
• F and C conversion function
• 5-speed fan speed selection
• High & low-pressure protection
• Overload protection
• Compressor 3 minutes delayed start function

In the box

Compressor, control box, sea water condenser, evaporator, centrifugal fan, 4-way reversing valve, all packaged as a compact component for easy installation and maintenance.

12 months limited Australian warranty

All Stellair Marine Air-conditioning Systems come with a 12-month limited warranty.

Downloadables:

Stellair Self-contained Air Conditioner Manual

An incredibly robust and reliable marine air-conditioning system built to last in the harsh marine environment. Corrosion resistant, light weight and quiet, these are the most ideal systems to have installed on vessels with 3 or more desired spaces to be cooled.

Stellair Split System air conditioners are made with cupronickel condenser tubing. The two separate units – the condenser and the evaporator – both built upon stainless-steel trays, each of which feature 2 drain ports, ensuring condensation does not linger. 

Where to install the units

The condenser must be installed in the bilge, engine room or utility room where it is sea water cooled. The condenser is purely pumping R401a refrigerant around the boat to the fan coils. The fan coils can be installed in the cabin or under the berth where they are able to supply cooling or heating through the grilles. Stellair supply grilles have been designed with the intention of fitting the aesthetic of most boats, so they will seamlessly fit the interior of a vessel.

Features

Corrosion resistant, small volume, light weight.

Control Panel

A sleek control panel accompanies this system with your choice of either black or chrome.  User friendly controls with raised buttons and an easy-to-read screen will help you reach your chosen air regulating mode. The system cools and heats with a 5-speed fan selection.

Digital Control Panel Features

• Cool mode, Heat mode, Fan mode
• F and C conversion function
• 5-speed fan speed selection
• High & low-pressure protection
• Overload protection
• Compressor 3 minutes delayed start function

What it comes with

Compressor, control box, sea water condenser, evaporator, centrifugal fan, 4-way reversing valve, all packaged as a compact component for easy installation and maintenance.

12 months limited Australian warranty

All Stellair Marine Air-conditioning Systems come with a 12 months limited warranty. 

Downloadables:

Stellair Air-Conditioner Split System Manual

Stellair Chilled Water Plants are high-capacity modular chiller units designed for large pleasure yachts and commercial vessels. The System is made up of several chiller modules with the same capacity, cooling, and heating function. Individual modules range in capacity from 24,000 – 180,000 BTU. A combination of 1-6 independent modules in total can make up one whole Modular Chilled Water Plant.

The Chilled Water Plant uses sea water to provide heat rejection into the chilled water system.You will install multiple fan coil units through-out the yacht into each room.

Every yacht is different, and as such, every system will be designed differently.

Stellair Chilled Water Systems are custom designed to fit each vessel’s very specific air regulating requirements.

Installation

The Chilled Water Plants will be installed in the engine room or machinery space and mounted on to a suitable frame so the chiller plant is secure and cannot flex or move.

Air Handlers should be installed in a position in the cabin to allow for return air flow to the unit and ducted supply air back to the cabin. Common installation positions are in wardrobes, under beds, within built in seating, wall cavities etc.

12 months limited Australian warranty

All Stellair Marine Air-conditioning Systems come with a 12 months limited warranty. This is an Australian warranty, backed by us, the supplier.

Designed for the most demanding yachtsman, developed together with boat builders. 

QS Seamaster has developed a complete and advanced line of DC, brushless, AC and hydraulic electric thrusters. Built and designed entirely in Italy, the product range includes 40 to 1100 Kgf models for boats and yachts up to 150ft.

QS Seamaster thruster benefits

The propeller

4 and 5 blade propellers designed specifically to ensure maximum performance and efficiency from each motor.
Propellers made of special composite or in NiBrAl. All double propellers are counterrotating.

The propeller of each of the thruster models between 40 and 1100kgf is specifically shaped in relation to its maximum revolutions, which provides the highest thrust efficiency.

The motor

A complete line of DC, AC, brushless DC-AC, retractable and hydraulic thrusters from 30 to 1100 Kgf thrust, available both with analogic or digital connection systems, on/off or proportional commands. The QS Seamaster bow and stern thrusters represent the most advanced range of products available on the market.

Noise

The noise production of QS Seamaster thrusters is reduced to the bare minimum due to the specific design of the propellers and the optimized streamline of the tail piece.

Installation

All of the thrusters we supply here at Stella are tunnel thrusters. 

Installation of a QS Seamaster bow thruster is super simple and requires minimal labour. 

A control panel, either equipped with a joystick or with push buttons, is available separately. Their shape and finish make these panels a perfect match with their engine instrument panels, allowing for a highly sophisticated combination.

Stella Backup Guarantee

Stella is proud to be the exclusive Australian importer and distributor of QS Seamaster Thrusters. Designed and manufactured in Italy, their Bow and Stern thruster product is second to none in quality and performance.

We don’t just sell the equipment; we also back it up. You can have confidence that with his vast years of experience that your installation will be the right one for your vessel.

Stella’s service and spare parts back-up is unrivalled, and in combination with the 2-year warranty from date of commissioning we know that your experience with our product will be trouble free.

If you have any questions, any problem or request, we are here to assist.

Stern Thruster

If you require almost absolute control of your boat under all imaginable circumstances, then a stern thruster is, in addition to a bow thruster, the ideal supporting navigational aid.

Benefits of a stern thruster

The combination of a bow and a stern thruster offers entirely new perspectives when maneuvering in tricky situations or in tight turns. By having the stern thruster rotating in the opposite direction of the bow thruster, you can make the boat turn on its axis. And when both propellers are operating in the same direction, you are maneuvering the boat perpendicularly on its normal direction line, to either port or starboard.

Installation of a stern thruster

The maintenance-free stern thruster is fitted to the transom of the boat. The electric motor and the other electrical components are positioned inside the boat, whereas the tunnel is located outside underneath the waterline. 

Bow and stern thrusters have become an important device when moving at low speed.

It makes manoeuvring easier, safer and quicker.

Craftsman Marine thruster benefits

The propeller

The propeller, which is made of maintenance-free synthetic material, can run in two directions, thus producing a jet flow to port or starboard. Each propeller is designed to achieve maximum thrust in a small tunnel diameter. This makes maneuvering in tight spots against a strong current or a shifty wind much easier.

The propeller of each of the thruster models between 35 and 170kgf is specifically shaped in relation to its maximum revolutions, which provides the highest thrust efficiency.

The motor

Craftsman Marine specifies the average force of the thrusters, however the starting peak force (1 second) can be easily 60% higher.

Noise

The noise production of Craftsman Marine thrusters is reduced to the bare minimum due to the specific design of the propellers and the optimized streamline of the tail piece.

Installation

All of the thrusters we supply here at Stella are tunnel thrusters. 

Installation of a Craftsman Marine bow thruster is totally uncomplicated and requires a minimum of labour. 

A control panel, either equipped with a joystick or with push buttons, is available separately. Their shape and finish make these panels a perfect match with their engine instrument panels, allowing for a highly sophisticated combination.

Stella Backup Guarantee

Stella is proud to be the exclusive Australian importer and distributor of Craftsman Marine Thrusters. Designed and manufactured by Craftsman Automation, their Bow and Stern thruster product is second to none in quality and performance.

We don’t just sell the equipment; we also back it up. Supporting our product is David Tanner who few would argue is perhaps the most experienced marine professional in the field. You can have confidence that with his vast years of experience that your installation will be the right one for your vessel.

Stella’s service and spare parts back-up is unrivalled, and in combination with the 2-year warranty from date of commissioning we know that your experience with our product will be trouble free.

If you have any questions, any problem or request, we are here to assist.

Stern Thruster

If you require almost absolute control of your boat under all imaginable circumstances, then a stern thruster is, in addition to a bow thruster, the ideal supporting navigational aid.

Benefits of a stern thruster

The combination of a bow and a stern thruster offers entirely new perspectives when manoeuvring in tricky situations or in tight turns. By having the stern thruster rotating in the opposite direction of the bow thruster, you can make the boat turn on its axis. And when both propellers are operating in the same direction, you are manoeuvring the boat perpendicularly on its normal direction line, to either port or starboard.

Installation of a stern thruster

The maintenance-free stern thruster is fitted to the transom of the boat. The electric motor and the other electrical components are positioned inside the boat, whereas the tunnel is located outside underneath the waterline. Craftsman Marine’s stern thrusters come in four sizes and capacities, with tunnel dimensions of 110, 150, 185 or 250 mm.

Additional Parts

Control Panels

Bow and stern thrusters liberate the skipper from his heavy handiwork. The control panels of the Craftsman Marine bow and stern thrusters also contribute to optimum ease of operation. Both push button and joystick control are available.

In the case of only a bow thruster, a single panel is used. Dual panels serve the purpose of both a bow and a stern thruster.

The top sides of the panels are made watertight in accordance with the protection classification IP66. Craftsman Marine thruster control panels are milled from an aluminium sheet and anodised to ensure perfect protection against all (marine) weather conditions. They also include protection for motor direction, temperature and continuous use.

Cables

Connection cables in 7,10, 15 and 20m lengths.

To connect the bow and/or stern thrusters to the appropriate control panel, a cable loom is required, which can be ordered to size, in lengths from 7 to 20m.

Craftsman marine cables come with watertight, multi-plugs. Cables of different lengths can be interconnected. With the aid of a splitter cable, two control panels can be connected to only one bow or stern thruster. 

Tunnels

GRP and steel to suit each thruster in 1 and 3m lengths.

Craftsman Marine can supply the required tunnels in various lengths and diameters, in steel, aluminium or GRP (fibreglass reinforced polyester) to suit each thruster in their product range.

Downloadables:

Craftsman Bow Thruster Range

The Hardest Pushing Boat Thrusters Ever Built

ABT TRAC bow and stern thrusters generate more thrust per horsepower than any other boat thruster on the market. One word to describe ABT TRAC systems – Powerful.

ABT-TRAC bow and stern thrusters deliver more thrust per horsepower than any other thruster available. TRAC’s twin counter-rotating propellers are more efficient and can reach higher horsepower than single prop thrusters.

ABT TRAC hydraulic thrusters are fitted with high efficiency piston motors. 8’ thru 12’ thrusters are available in a DC version and all ABT-TRAC thrusters are available in AC versions.

Thruster Controls

Thruster control is available in single or proportional speed. Proportional thruster control enables precise manoeuvring control.

TRAC Integrated Hydraulic System

Most ABT-TRAC thrusters are powered by a TRAC Integrated Hydraulic system. Integrated Hydraulics may also support stabilizers, windlasses, capstans, cranes, or other hydraulic equipment.

ABT-TRAC Thrusters promise Heavy Duty Service and Reliability

ABT TRAC bow and stern Thrusters are built for heavy duty service. Gears and bearing are intentionally oversized. Propeller hubs shroud the gearbox to protect the prop shaft. A rotating seal guard provides absolute protection of the shaft seals. ABT-TRAC boat thruster systems are extensively documented and delivered ready-to-install. Expert support is always available from factory technicians and through our extensive global service network.

ABT TRAC Thruster Service or Installation

ABT-TRAC Thrusters are installed as standard equipment by more of the world’s top yacht builders than any other brand. For exceptional performance, highest quality and unmatched support choose TRAC thrusters for your boat.

We don’t just sell the equipment; we also back it up with a complete installation, commissioning and maintenance service via our marine engineering division who have been factory trained by TRAC technicians.

ABT-TRAC manufactures advanced integrated hydraulic systems that not only power the ABT-TRAC range of Thrusters and Stabilizers, but also included ancillary equipment such as capstans, windlasses, cranes, generators, bilge pumps and more.

Every vessel gets evaluated individually and the system is custom designed to support the specific needs of your yacht.

Using high efficiency hydraulic piston pumps driven from the main engines or PTO’s from the marine gears or generators, you can be sure your system will be ready to perform.

AC power packs are often added to provide back up and hydraulic power while you are at anchor. TRAC also designs all systems with expansion in mind, so rest assured that your system can grow to meet your hydraulic demands.

All of TRAC’s systems come standard with high-capacity cooling, so you can operate the system continuously without heating, we also closely monitor oil levels and temperature so you know your system is always safe.

With thousands of systems out in the marketplace, powering vessels all over the world you can be assured that you have a quality system that is backed up by our expert factory trained technicians and global service partners.

ABT-Trac’s systems are installed as standard equipment by more of the world’s top yacht builders than any other brand. If you expect exceptional performance, outstanding quality and unmatched support, you can’t go past a Trac system.

Downloadables:
ABT-TRAC Integrated Hydraulic System

Dualis Electra Bow Thrusters

The electric bow thruster with a high thrust/power ratio and compact installation size you’ve been looking for – Dualis Electra by CMC Marine.

Dualis Electra uses a new generation of electric motors that, coupled with the up-to-date CMC Marine pod, offers all the advantages of traditional electric thrusters, while the overall volume and weight of the entire system is dramatically reduced.

Benefits of the Dualis Electra AC-Driven Bow and Stern Thrusters

• Engineered for heavy-duty use
• Low volume and weight
• Reliable and durable
• Low Noise level
• Easy Installation
• Compact Unit Dimension
• Maximum efficiency and optimized hydrodynamics
• Low Maintenance

Directa control advantages

• A Variable Frequency Drive (VFD) controls the electric motor power consumption.
• The VFD is spray resistant for safety and protection (shielded IP64).
• The switchboard is also spray resistant (shielded IP64).
• Full Proportional and directional control.

The joystick on the control panel allows proportional thrust increase or reduction. The control panel is very compact and is available in a dual joystick version for bow and stern thruster.  

Bow and stern thruster tunnels

CMC Marine offers Tunnels made of reinforced GRP, aluminium alloy, or steel.

You can also choose between several standard diameters and lengths.

Hydraulic Version Available

Dualis Thruster Hydro 

Reliability you can count on.

Sharing the same mechanics as the Dualis Electra, Dualis Hydro is the hydraulic-powered version! The mechanics (pods, tunnels, etc) and the interfaces (command panels, etc) are all the same.

CMC’s Dualis Hydro bow thrusters all feature dual counter-rotating propellers, which can be mounted either at the bow or stern.

The thrusters are suitable for a wide range of uses with available power from 18 to 130 KW.

Suitable for vessels with steel, aluminium or composite hulls starting from about 18 – 20 metres.

Dualis Thruster Hydro advantages

• Highly efficient
• Proven reliability
• Low Noise level
• High Flexibility
• Wide Power range
• Use of dual counter rotating propellers
• Low hydro Dynamic resistance

Electric rudder control system that, when integrated with other Waveless products STAB and Trim, can provide excellent course keeping and smooth changes of direction.

Cruising will never be the same.

Dia-log

Waveless products are equipped with CMC Marine’s patented DIA-LOG software, the same used on super and mega yachts.

Underway and Anchor mode are always available.

You can have complete control of your system thanks to a touch screen, designed to have all the features at your fingertips.

Features Available:

Flip

FLIP mode allows the STAB fins to rotate 180° while in Anchor mode.

Reduce ”anchor walk” and keep the anchor chain tight and the bow in the wind in any weather condition.

Actual flip angle can be adjusted at commissioning time to account for hull shape and prevent interference with the chain.

Night Mode

Reduce STAB power absorption to approximately 60%, while in Anchor mode.

Night mode is useful to limit power demand on generators and extend battery duration when working on the yacht’s DC system.

Adaptive 

In Adaptive mode, your STAB system monitors sea conditions and adjusts operation parameters automatically to provide the best stabilization for every condition.

Integrated Stabilisation System

CMC Marine’s has established its industry leadership for motion control, through a full range of solutions. Every system is an assembly of the most advanced, robotic-industry standard technologies, made to work with the highest standards of performance, accuracy, fast response, reliability and energy efficiency. All systems can operate independently whenever required, but maximum performance is achieved when they work together, controlled by the same algorithm, processor and motion sensors. Dia-log performs at its best when installed with waveless stabilisers and trim.

Our 300kg Folding Davit is an essential piece of marine equipment for any vessel wishing to lift tenders or loads up to 300kg. It features a manual luff with detent pinned hoisting and manual jib extension with detent pinned hoisting, providing reliable and precise control during operation.

The davit body and jib extensions are DNV certified 5083 aluminium, ensuring durability and strength in marine environments. Included with the davit is a 12 or 24 volt CE approved electric hoist with a 2-button remote and 4.5 meters of curly cord. The hoist has a line speed of 5.5 meters per minute and a current draw of 12V-80 amps or 24V-40 amps at maximum load.

The hoisting rope is made of Dyneema SK 75 for added strength and durability. The standard reach of the davit is 1.8 meters or 2.3 meters, with a lift height above deck of 1800mm. When stowed, the davit has compact dimensions of 500mm length, 1279mm height, and 425mm width. It has a weight of 85kg and features a powder coat finish for added protection against corrosion and wear.

Features

• Manual luff and jib extension with detent pinned hoisting for precise control
• DNV certified 5083 aluminium body and jib extensions for durability and strength
• 12 or 24 volt CE approved electric hoist included for easy operation
• 2 button remote and 4.5 meters of curly cord for convenient control
• Dyneema SK 75 hoisting rope for added strength
• Compact stowed dimensions
• Powder coat finish for protection against corrosion and wear

Our 250kg Single Stage Davit is a top-of-the-line product and an essential piece of marine equipment for any vessel wishing to lift tenders or loads up to 250kg, designed to meet the highest safety standards. It is manufactured to AS 1664, ensuring the safety of you and your family.

This davit features a manual luffing system with pneumatic assistance, making it easy to operate. It is also equipped with ADC\\\\’s unique auto jib extend feature, allowing for smooth and efficient hoisting.

Features

• Manual luffing with pneumatic assistance
• ADC’s unique auto jib extend feature
• High tensile materials for durability
• DNV certified deck post, spigot, and boom section
• 12/24 volt hoist with remote control
• Lightweight and easy to handle
• 6-step marine coating system for corrosion protection
• Approved by Australian standards

Our 350kg Single Stage Davit is the perfect solution for hoisting and extending jibs on your boat. Manufactured to meet Australian Standard 1664, this davit ensures the safety of you and your family while out on the water. Its manual luff and jib extension are detent pinned for easy hoisting of tenders and loads, while the manual slew on Acetal bearings and SRBF thrust washer allows for smooth and precise movement.

Constructed with DNV certified 5083 Aluminium, this davit is strong and durable. It comes with a 12 or 24 Volt hoist, and a 2 button remote attached with a 4.5m curly cord for convenient operation. The current draw at maximum load is 12V-80 Amps or 24V-40 Amps, with a line speed of 5.5m per minute. The hoisting rope is made of Dyneema SK 75 for added strength and reliability.

The standard reach of our 350kg Single Stage Davit is 1.8m or 2.3m, with a lift height of 1800mm above deck. When stowed, it has dimensions of 500L x 1279H x 425W, making it easy to store on your boat. The epoxy marine coating inside and out ensures its durability and protection against corrosion.

Features

• Hoisting and extending jib capabilities
• Manual luff and jib extension with detent pins
• Manual slew on Acetal bearings and SRBF thrust washer
• DNV certified 5083 Aluminium construction
• 12 or 24 Volt hoist with 2 button remote and curly cord
• Dyneema SK 75 hoisting rope
• Lightweight and compact design
• Epoxy marine coating for protection against corrosion

Our 450kg Single Stage Hydraulic Slew and Luff Pneumatic Extend Hoist is a high-performance hoisting solution designed for marine applications. Made in Australia, this hoist is equipped with a unique auto jib extend feature, making it a top choice for efficiency and precision.

Constructed with a 316 stainless steel jib extension and DNV certified 5083 aluminium boom section and deck post, this hoist is built to withstand harsh marine environments. The Australian made hydraulic luffing cylinder with inbuilt counterbalance valve ensures smooth and controlled hoisting, while the hydraulic slew arrangement allows for easy rotation.

The hoist is powered by a 12, 24, or 240 volt power pack with Rexroth C-Top valves, solenoids, and manifolds, and features a 12 or 24 volt CE approved electric hoist. The 6 button remote, attached with a curly cord, allows for convenient and safe operation. The hoisting rope is made of Dyneema SK 75 for durability and strength.

With a 6 step marine coating system, this hoist is protected against corrosion and designed to last in harsh marine environments. Experience superior hoisting capabilities with our 450kg Single Stage Hydraulic Slew and Luff Pneumatic Extend Hoist.

Features

• Australian Made Hydraulic Luffing Cylinder with Inbuilt Counterbalance Valve
• Australian Made Hydraulic Slew Arrangement
• Unique Auto Jib Extend Feature
• DNV Certified 5083 Aluminium Boom Section and Deck Post
• 316 Stainless Steel Jib Extension
• 12, 24, or 240 Volt Power Pack

Our 550kg Single Stage Hydraulic Slew Luff Extend Davit is the perfect solution for handling heavy tenders with ease. This product is proudly Australian made and features a hydraulic luffing cylinder with an inbuilt counterbalance valve, as well as a hydraulic slew arrangement. The jib extension is made from 316 stainless steel and is fitted with our unique Auto Extend feature, making it even easier to use.

The davit head is made from high tensile aluminium-magnesium cast and is precision drilled in a 6-axis CNC mill for maximum durability and strength. The boom section is DNV certified 5083 aluminium, while the deck post and spigot are also DNV certified 5083 aluminium or can be replaced with a 316 stainless steel plinth with a conical cover.

The product includes a 12, 24, or 240 volt power pack with Rexroth C-top valves, solenoids, and manifolds, as well as R7 hose and hose tails. An electric hoist is also included, available in 12 or 24 volts and CE approved. The package also comes with a 6-button remote attached with a curly cord or a radio remote for easy control. The hoisting rope is made from Dyneema SK 75 for extra strength and durability.

To ensure maximum protection against harsh marine conditions, our product features a 6-step marine coating system. This product is designed to make heavy tender handling a breeze, and is suitable for both personal and commercial use.

Features

• 550kg capacity for heavy duty use
• Australian made hydraulic luffing cylinder and slew arrangement
• Our unique Auto Extend feature for added convenience
• DNV certified 5083 aluminium boom section and deckpost/spigot
• 12V, 24V, or 240V power pack
• 6-button remote with curly cord or radio remote for easy control
• Dyneema SK 75 hoisting rope for strength and durability
• 6-step marine coating system for protection against harsh conditions

The Premium Helm Chair.

Experience the perfect blend of luxury, functionality, and durability with our Premium Helm Chairs. Designed and meticulously crafted in our Stella workshop located on the Gold Coast, these helm chairs can be tailored to suit your vessel and personal preferences. Whether for indoor or outdoor use, their ergonomic design ensures unparalleled comfort during every journey.

Customise your chair with a wide range of premium materials, including UltraFabric, Genuine Leather, or Marine-Grade Vinyl, in a variety of colors and styles to complement your vessel\’s aesthetics. The Premium Seat offers versatile mounting options on pedestals, swivel bases, or sliding bases, catering to your specific needs.

Key features include:

• Stainless Steel Frames: Built for strength and durability.
• Adjustable Backrest & Moveable Armrests: For personalised comfort.
• Removable Headrests: Adaptable to your preferences.
• Sports Flip-Up Seat: Combines style with convenience.

Stella Premium Helm Chairs are designed to enhance your boating experience with enduring quality and sophisticated design. Perfect for those who demand excellence at the helm.

The Standard Helm Chair.

All the usual Premium Helm Chair features, but in a more compact version. This seat provides excellent ergonomic comfort and navigation safety.

Specifically designed for smaller boats where there is limited space at the helm or if you need a lower backrest to see what is behind you easily, the Standard Helm Chair is the solution.

Featuring marine grade stainless steel frames with an adjustable backrest, moveable armrests and the standard sports flip up. The Standard Helm Chair can be covered in a range of colours and styles, including UltraFabric, Genuine Leather or Marine Grade Vinyl. As well, according to your preference, the Standard Helm Chair can be mounted on pedestals, swivel bases, or sliding bases.

Australia’s Strongest Range of Hydraulic Swim Platforms

Our Stella Hydraulic Swim Platforms are renowned for their patented technology and precision engineering, setting a benchmark for innovation and performance within the marine industry.

Each platform is meticulously engineered to deliver seamless operation, ensuring smooth and consistent raising and lowering. This unique Australian designed swim platform features patented technology that allows the platform to lock securely in any position. The weight of the platform is evenly distributed across the transom with hydraulic cylinders on both sides, minimising stress and enhancing durability. Constructed with marine-grade stainless steel, including the hydraulic cylinders, the lifters are designed to prevent corrosion and withstand the harsh marine environment.

Recognising the individuality of each vessel, we design every swim platform to meet the specific requirements of your vessel. Using precise drawings and measurements, our skilled naval architects and design engineers are able to create a solution tailored to your needs.

Hydraulic swim platforms have become an essential feature for new builds and refit projects, offering numerous benefits such as increasing usable deck space, providing a safe swimming platform, and serving as a carrier for jet skis and tenders. It’s no surprise that these platforms are now considered a must-have accessory.

While underway, the platform should always be in the stowed position for safety.

Features of Stella Hydraulic Swim Platforms

• Effortless operation: Safe, one-person operation with remote control functionality.
• Optimised design: Lightweight arms reduce stress on the transom compared to competitors.
• Simplified maintenance: Square design facilitates easy installation, antifouling, and barnacle removal.
• Patented technology: Ensures even raising and lowering as well as positive locking in all positions.
• Customisable aesthetics: Platforms are designed to complement the unique lines and style of each boat.

Technical Specifications

• Dual hydraulic cylinders for balanced operation.
• Four-valve hydraulic power unit (12 or 24 VDC) with ignition protection.
• Engineered for superior strength and durability.
• Internal hydraulic flow control for precise performance.
• External hydraulic lines with 316 stainless steel fittings.
• CNC precision machined.

Balance Below Waterline

Stella’s lifter mechanisms are designed to combine power with aesthetic appeal. Key features include:

• Even weight distribution: Dual lifter arms ensure the load is evenly dispersed across the transom.
• Customisable lift capacity: Platforms can be tailored to meet specific requirements, with capacities up to 2-tonnes achieved.
• Flexible installation: Hydraulic connections and arm/platform placement can be adjusted to suit individual transom designs.

Enquire with us to explore the capabilities of our Hydraulic Swim Platforms and discover how we can elevate your boating experience.

Australia’s Strongest Range of Rotary Hydraulic Swim Platforms

Our Stella Hydraulic Swim Platforms are renowned for their patented technology and precision engineering, setting a benchmark for innovation and performance within the marine industry.

Each platform is meticulously engineered to deliver seamless operation, ensuring smooth and consistent raising and lowering. This unique Australian designed swim platform allows the platform to lock securely in any position. Constructed with marine-grade stainless steel, including the hydraulic actuator, the lifters are designed to prevent corrosion and withstand the harsh marine environment.

Recognising the individuality of each vessel, we design every swim platform to meet the specific requirements of your vessel. Using precise drawings and measurements, our skilled naval architects and design engineers are able to create a solution tailored to your needs.

Hydraulic swim platforms have become an essential feature for new builds and refit projects, offering numerous benefits such as increasing usable deck space, providing a safe swimming platform, and serving as a carrier for jet skis and tenders. It’s no surprise that these platforms are now considered a must-have accessory.

While underway, the platform should always be in the stowed position for safety.

Features of Stella Hydraulic Swim Platforms

• Effortless operation: Safe, one-person operation with remote control functionality.
• Simplified maintenance: Square design facilitates easy installation, antifouling, and barnacle removal.
• Customisable aesthetics: Platforms are designed to complement the unique lines and style of each boat.

Technical Specifications

• Centralised actuator for balanced operation.
• Single-valve hydraulic power unit (12 or 24 VDC) with ignition protection.
• Engineered for superior strength and durability.
• Safety counterbalance valve to ensure safe operation.
• External hydraulic lines with 316 stainless steel fittings.
• CNC precision machined.

Balance Below Waterline

Stella’s rotary lifter mechanisms are designed to combine power with aesthetic appeal. Key features include:

• Customisable lift capacity: Platforms can be tailored to meet specific requirements, with capacities up to 2 tonnes achieved.
• Flexible installation: Hydraulic connections and arm/platform placement can be adjusted to suit individual transom designs.

To download WhisperPower’s full Marine Catalogue and learn more about the Piccolo range click here

Over the past 20 years, WhisperPower M-SQ generators have established a strong reputation as one of the most durable and reliable fixed rpm (1500/1800) generators in the world. These SuperQuiet diesel generators meet the challenges of commercial and high-end recreational marine applications.

Sewage? The Solution

The discharge of raw sewage into the sea can create a health hazard. Sewage can also lead to oxygen depletion and can be an obvious visual pollution in coastal areas – a major problem for countries with tourist industries.

The main sources of human-produced sewage are land-based – such as municipal sewers or treatment plants. However, the discharge of sewage into the sea from ships also contributes to marine pollution.

Therefore, the regulations in Annex IV of MARPOL prohibit the discharge of sewage into the sea within a specified distance of the nearest land, unless the ships have in operation an approved sewage treatment system.

www.imo.org

Our Sewage treatment system are designed for the treatment and removal of bacterial pollution through an oxide/reduction process and to drastically reduce TSS, BOD5, COD, turbidity and the organic and physical pollutants in waste water produced on boat thanks to a fine purification system.

Treat the black water on your vessel with Blue Sea

The BLUE SEA system is a new generation wastewater purifier capable of treating from 2500-22000 litres a day.

The Blue Sea system is equipped to purify, macerate and sterilize all in accordance with the enforced norms regarding the discharge of wastewater into the sea.

In fact, a BLUE SEA marine wastewater treatment plant guarantees the elimination of bacterial pollution through an oxide/reduction process and, most of all, drastically reduces TSS, BOD5, COD, turbidity and the organic and physical pollutants in wastewater produced on a boat, thanks to the fine purification system.

Selmar BLUE SEA treated wastewater complies with the international regulation of “Marpol” environmental rules.

Selmar’s purification system is based off of an advanced oxidation-reduction process as well as being equipped with two units of U.V sterilization (primary and secondary), an air blower, oxygenation unit, flotation system, “cleaning/sanitation” unit and the advanced maceration/comminution stage. All of these stages and units together complete the marine sewage treatment plant and make it unique in its kind.

The “Advanced Oxidation Process (AOP)” uses a combined action of ozone, OH free radicals, ultraviolet rays and hydrogen peroxide, making it incredibly effective for black and grey wastewater treatment.

Selmar BLUE SEA Range Specs Tables

Models & Characteristics

Hydraulics: System Characteristics

Standard Features

•   Automatic cleaning system
•   Liquid oxidant tank
•   Electronic overflow
•   Mechanical overflow
•   Hour meter
•   Primary “U.V. STERILIZER” with control box
•   Air blower
•   Cycle counter
•   Mechanical sensor of minimum level for onboard sewage tank, with installation kit
•   Operator panel with LCD display for control and self-diagnostics

Accessories and Extras

•   Macerator booster pump
•   Seawater pump
•   Air filter (activated carbon)
•   U.V. sterilizer for post-secondary treatment
•   Remote control with LCD display
•   Siphons for the sewage water and seawater charging lines
•   Grease traps:
  • Mod. SEL 075/T
  • Mod. SEL 125/T
  • Mod. SEL 175/T
  • Mod. SEL 075/plus
  • Mod. SEL 125/plus
  • Mod. SEL 175/plus

The technical features integrated into every Planus marine toilet are what set them apart from any other in the marketplace. The pump has an 80 meter vertical and 8-meter head – you are not restricted by plumbing lengths or head heights. They are designed to be as quiet as possible. Planus have patented systems that eliminate cavitation in the bowl and hammer in the water pipes. Planus toilets are brilliant for fitting in small spaces, specifically designed to fit a full-sized porcelain bowl onto yachts. The only real difference between the range of Planus toilets is the porcelain shape – technically they are the same.

Technical Features

The Vortex System

The high-speed rotation of the VORTEX pump and the geometric design of its piping create a great vacuum able to remove water and organic waste from the bowl. The high-level performance ensures the greatest possible flexibility in planning the route of the discharge hoses, allowing it to reach significant distances and heights. 

Air Vent Anti Cavitation

The noise of the vortex pump in many marine toilets is due to cavitation caused by the presence of air in the pump that is sucked through the toilet drainage hole at the end of each discharge sequence. Planus systems use a patented “automatic vent air discharge” system that enables the pump to run without cavitation. No cavitation = minimal noise. 

Water Hammer Arrestor 

Planus has introduced the “water hammer arrestor” as a standard component of its preassembled inlet solenoid, eliminating hammer in the water pipes when the solenoid shuts off. This device is very effective in reducing noise and vibration along the inlet pipeline. 

Dripping Water System

Planus makes the ceramic bowl with a “dripping water system”. This system eliminates the need for ugly, noisy plastic nozzles inside the toilet bowl. 

Rectified Bowls

Planus rectifies its bowls in order to guarantee the perfect installation. Planus, after porcelain bowls cooking, rectifies both the base and the rear wall by the use of a numerical control machine. This further work guarantees a perfect and uniform (90°) toilet.

Soft Close Hinge Option

The new soft close hinge, in ASI 316 stainless steel, offers high slowing down efficiency, elegance and firmness. 

The soft close system is nowadays a common feature offered to the market. However this system has so far only been applied to light plastic seats and cover. Planus differentiates itself in this regard after having developed a series of soft-close hinges with original highest quality SUGASTUNE damers, world’s leader in this field, and applied them to its luxury wooden seat and cover with bright polyester coat.

High-Quality Seats

Planus supplies its bowls with a high-quality wooden seat covered with a polyester coating, available in standard or soft close. 

Control Panels

We stock and supply a One Button controller and a Two-Button controller. The biggest difference is that the Two Button controller will ensure there is no water left in the bowl after use. 

The Three Models Explained and their key differences

Stella supplies three types of Planus toilets – Match, Stilo and New Artic. These are then further broken down into Match Short, Match Cut Short, Stilo Plus, Stilo, and New Artic. 

Defining the models:

Cut – A ’Cut’ model of a Planus marine toilet means that the back has been cut at an angle for best installation practice. 

Short – Is as its namesake suggests, the shorter version.

Distinguishing features

Match models are the shortest Planus Toilets. The only difference between Match Short and Match Cut Short is the angle at which the back of the toilet is cut. 

Stilo is the middle model, it is taller than the Match series and shorter than the New Artic

Stilo Plus has the largest bowl, longest top area, and biggest base.

New Artic is the tallest and skinniest with the smallest bowl. 

Dimensions

A side by side comparison of each toilet and it’s dimensions is supplied.

Downloadables:

Planus Match Short Dimensions

Windscreen Wipers, Blades & Motors for Boats

Wipers designed for use in all marine environments.

Exalto produces the world’s best professional marine wiper systems for all kinds of vessels in the commercial and leisure sectors. 

They offer a wide range of high performance motors, innovative arms, durable blades, controls and washing systems. In this way Exalto can compile a complete wiper system that fulfils the specific demands and wishes of the customer. 

Exalto Wiper Systems Advantages

Exalto wipers have stainless steel shafts and fixings. The drive shafts run in self lubricating brass bearings to ensure many hours of trouble-free performance. The wipers feature two speeds, self parking and offer in combination with one of our many control systems intermittent speeds, smart wipe/wash function and on certain system synchronized wiping.

All MD and HD wiper arms and blades are manufactured from T316SS. Exalto Wiper Systems are made of high quality materials to assure many years of reliable work. The wiper systems are designed in our own Research and Development Centre and have undergone intensive testing. Exalto offers complete systems. 

A typical wiper system contains 

• Wiper motors
• Wiper arms
• Wiper blades
• Wiper controls
• Washing systems

Sizing the right windscreen wiper blades and arms for your boat

The size and shape of the glass that has to be wiped determine which motor, arm and blade are needed. The larger the wiping area, the larger the arms and blades have to be to cover that area. The larger the arms and blades are, the stronger the motor has to be. Therefore we divided our products in sections: large windows (1100-2500mm in height), medium and small sized windows (till 1100mm in height). 

Exclusive Australian Exalto Suppliers

Stella supplies the entire Exalto Marine Wiper System range. Our staff are experienced in designing the right wiper system for boats so please enquire and we will make sure you are fitted with the right windscreen wipers, blades, arms, motors and washing systems for your boat.

Downloadables:

Exalto 2020 marine wiper catalogue

The Scalino generator is designed for outdoor (under-floor) use but can be used inside a vehicle or land object as well. The system consists of the WhisperPower diesel engine, the sound guard and the PMG inverter which has to be installed separately from the engine part. The inverter regulated AC output ensures a perfect use of critical appliances such as measurement equipment, computers, air conditioning, electrical cooking devices and various other AC (230 V, 50 Hz, or 120 V 60 Hz) equipment.

The WhisperPower Scalino 4 Genverter© is the smallest, lightest and most powerful liquid cooled diesel generator in the world. With an extremely low audible noise level as a result of the oil cooled technology applied to the engine in combination with the rugged stainless steel sound shield. Output power of the non-emission model is 4.4 kVA, 3.5 kW, the output power of the Stage V version, fitted with a catalyst, is 3.4 kVA/ 3 kW. Operating speed between 2400 and 3600 rpm, adjustable or with automatic rpm control. Two Scalino Genverters can be operated in parallel to double the power. The Scalino Genverter is designed to operate with WhisperPower inverter/ chargers and (lithium) batteries enabling zero-emission/ silent time.

The Elite generator range of compact generators combines the latest diesel engine technology with a new way of producing electrical power. Instead of adding an alternator with fixed speed on the back of the fly-wheel, we have designed a very compact permanent magnet alternator (PMA), located just behind the engine. As a result, these systems are much smaller and lighter compared to traditional generators. The generator RPM can be fixed to a position offering the optimal balance between RPM, output power, audible noise and vibration.

Following the world wide success of the Scalino 4, 1 cylinder Genverter© variable speed generator, we have extended our Genverter range to power ratings up to 18 kVA. Perfect in size and weight, super silent and virtually vibration free. All models can be connected for parallel use to double the power. Our range of WhisperPower Elite Genverters are available from 6 kVA to 18 kVA, to learn more about the range enquire today.

Compact, silent and light weight

• Modern, low emission diesel engine
• Emission level: Stage V, EPA, Tier 4 as standard
• Compact, super noise-damping polyester sound guard
• Available power ratings 6, 8, 10, 12 15 and 18 kVA
• 230 VAC/50 Hz or 120 VAC/60 Hz, adjustable by user

Extremely energy efficient

• Efficiency of 96% instead of 75% (traditional systems)
• Lower fuel costs
• Rotating speed can be set to load demand
• External PMG inverter providing the perfect sine wave
• Maximum stability of the Hz at load/ no load and rpm variations

Choose from AC or DC variations

• AC single phase with PMG inverter
• DC versions with 1,2 or 3
• DC PowerCubes, fast chargers (24 or 48 VDC)
• Charge power perfect for lithium batteries
• DC system includes land to system charging
• Charge power from 4.3 kW – 15 kW

To download WhisperPower’s full Mobile Catalogue and learn more about the Elite range click here

Over the past 20 years, WhisperPower W-SQ generators have established a strong reputation as one of the most durable and reliable fixed rpm (1500/1800) generators in the world. These SuperQuiet diesel generators meet the heavy duty challenges of commercial mobile applications. The WhisperPower W SQ Pro range is the solution for applications where a constant level of high quality, non-stop electrical power is required. Available from 15 kVA to 50 kVA, for single or three-phase output, complete with sound guard or as an open frame unit. All models are supplied with advanced control panels and all necessary installation parts to ensure a durable installation. All PRO models are Stage V/ EPA Tier 4 compliant.

General description

The revolutionary quicKutter© system eliminates rope and line problems.  The system has no moving parts to wear out and is easy to install. 

How does the Quickwater quicKutter© System Work?  

The Quickwater spool is fixed to the propeller between the propeller and bearing carrier to prevent the rope or line from wrapping around the shaft. It provides a surface for the rope or line to wrap around to enable the quicKutter© blades to continually cut the coils of rope or line as they form and are pressed against the quicKutter© blades.

The quicKutter© is fixed to the bearing carrier and protrudes out over the Quickwater spool surface ensuring that the clearance does not allow rope or line to pass under the blade and that rope or line is continually cut away to allow a continuous flow of water to exit from the bearing.

QuicKutter Benefits

Avoid Entanglement and Bearing Failure

Rope and line entanglement can cause bearings to overheat or damage to seals

Cuts Rope, Line, Weed, Stainless Steel Wire*

Rope and line up to 1“ (25mm) and 3/16“ (4.75mm) SS cable *with optional hardened blades 

Improve Crew Safety

Avoid possible structural damage and loss of propulsion, reduce need to dive overboard to untangle

Reduced Maintenance Costs

Increased bearing and shaft life, reduced downtime and avoid potential loss of income

Boat Speed and Performance

Streamlined design creates less turbulence, vibration and drag than other cutter designs

Cuts Rope, Line, Weed, Stainless Steel Wire*

Rope and line up to 1“ (25mm) and 3/16“ (4.75mm) SS cable *with optional hardened blades

Australian Designed and Manufactured

Patented shaver cutter, buy Australian and support your local industry

Available in 4 sizes

Series 16 for shaft sizes 1“- 2“, Series 25 for Shaft sizes 2“- 4“, Series 32 for Shaft sizes of 4“- 6“ and series 57 for larger applications

Easily installed and fits all shaft sizes (Can be fitted to vessels with full keels).

Maritex Bearings are purpose made for seawater and uniquely designed for the dual purposes of water lubricated hydro-dynamic high speed rotating shafts as well as completely self-lubricating slow speed applications such as rudder and ride control bearings. Intended for ambient marine operating temperatures the material has outstanding dimensional stability for both wet & dry operating conditions.

Maritex Bearings in Silty Water

When operating for extended periods in silty water, customers with vessels operating in both temperate and tropical waters have reported that Maritex Aquarius propeller shaft bearings perform extremely well. In fact the performance of Maritex Aquarius bearings operating in silty water is well beyond their expectations.

Maritex Bearings Rry Running

In addition to being developed specifically for long term immersion in seawater, Maritex bearing material is outstanding in dry conditions. It is a hard wearing, low friction, tough bearing material made from high strength thermoset resin reinforced with synthetic fibres.

Excellent Wear Characteristics

Unique reinforced Novalac resin composite provides outstanding strength and durability

Superior Dimensional Stability

Non-melting, outstanding creep resistance and higher operating temperature together with natural lubricity permits unrivalled dry running capability

Low and High-Speed Applications

Easily handles dry or wet operation at low speed e.g. hinge type rudder bearings

as well as high speed continuous water lubricated propeller shaft bearings

Easy to Machine

Virtually zero dust and smell, no tip wear and no annoying ribboning swarf

Antifouling Properties

Mechanical: unique synthetic fibres resist and scrub out potentially harmful abrasives

Chemical: material contains chemicals to reduce marine growth

Australian Designed and Manufactured

Buy Australian and support your local industry

Lloyds Approval

Maritex Grade 1810 is Lloyd’s Register Type Approved and

Maritex AQUARIUS® is in the process of gaining type approval

Waveless is the new line of ultracompact electric fin stabilizers designed for boats of 12 meters (40 ft) in length and up, offering STAB stabilizer models and TRIM intruder models. Same quality and performance as superyachts, CMC systems have been customized for smaller yacht needs. 

Waveless STAB is designed to be installed quickly and with no stress. It takes little space (and  weight) on board so it can be moved and placed easily. And being electric, no piping is needed. 

Waveless Advantages

Top Quality 

Best-in-class roll reduction both Underway and At Anchor, with softer (lower acceleration) yacht  motion for unequalled comfort. 

Ultra-Compact 

The smallest unit has onboard dimensions of 38 centimetres in diameter and 22 centimetres in height.

Low Noise 

Silent! Negligible noise and vibration, often installed under Owner’s or VIP’s beds.

Low Power 

High efficiency (>85%) means lower power demand on generators and reduced energy consumption. 

Fast 

Immediate ON/OFF mode.

Lower Maintenance

Zero maintenance required on electrical motor and gearbox. Remote assistance options for online, real-time diagnostics.

Specifications:

https://wavelessmarine.com/stab/ 

Dia-log

Waveless products are equipped with CMC Marine’s patented DIA-LOG software, the same used on super and mega yachts.

Underway and Anchor mode are always available.

You can have complete control of your system thanks to a touch screen, designed to have all the features at your fingertips.

Features Available:

Flip

FLIP mode allows the STAB fins to rotate 180° while in Anchor mode.

Reduce ”anchor walk” and keep the anchor chain tight and the bow in the wind in any weather condition.

Actual flip angle can be adjusted at commissioning time to account for hull shape and prevent interference with the chain.

Night Mode

Reduce STAB power absorption to approximately 60%, while in Anchor mode.

Night mode is useful to limit power demand on generators and extend battery duration when working on the yacht’s DC system.

Adaptive 

In Adaptive mode, your STAB system monitors sea conditions and adjusts operation parameters automatically to provide the best stabilization for every condition.

Integrated Stabilisation System

CMC Marine’s has established its industry leadership for motion control, through a full range of solutions. Every system is an assembly of the most advanced, robotic-industry standard technologies, made to work with the highest standards of performance, accuracy, fast response, reliability and energy efficiency. All systems can operate independently whenever required, but maximum performance is achieved when they work together, controlled by the same algorithm, processor and motion sensors. Dia-log performs at its best when installed with waveless stabilizers and trim.

The HS System is an evolution of the SE Stabilis Electra System, optimised for planing yachts that can reach over 24 knots.

The HS system has some notable improvements compared to the previous model, including greater optimisation of the fin profile for better performance and a reduction of the resistance; updated electronics for even faster and more controlled performance in addition to the ability to control integrated systems (for example, steering or intruder) together with the fins.

Stabilis Electra HS system advantages

• For boats faster than 24 knots
• New fins Shape that ensures better performances by reducing the induced
• New electronics: Reduced weights with better performance
• Inertial platform that allows to analyse roll, pitch and yaw data
• Maximum reliability of mechanics derived from the experience of gained with the many applications of SE system
• Possibility to control up to 4 axis combining different control surfaces (steering or intruders) with stabilizing fins
• Platform control development through the interaction of multiple surfaces

Specifications
https://www.cmcmarine.com/fin-stabilizers 

The LR Fin Stablisation System has been optimised for displacement or semi-displacement yachts.

Benefits of the Long Range fin stabilizers

Include compact actuators with the same power of the equivalent SE system; better performance; a fin geometry specifically designed for displacement yachts; the possibility to install fins of up to 5 square meters and new electronics with the ability to integrate the controls for up to 8 different systems. The LR range uses a highly accurate inertial detector that detects the Roll, Pitch and Yaw of the yacht which in turn provides the input to the system to provide a very high level of platform stability.

CMC Advantages

• For displacement or semi-displacement boats
• More compact machines with the same power respect to SE equivalent
• Possibility of installing larger fins (Increase of cop/power ratio)
• New electronics: Reduced weights with better performances
• Fin profile optimized for displacement boats
• Control platform developed thanks to the possibility to drive 8 control surfaces
• 3-axis inertial platform
• Possibility to reduce the sizes installed on board at a lower price

Trac are the world’s largest stabilizer manufacturer and produce both underway and STAR (STabilisation At Rest). 

ABT-TRAC Yacht Stabilizers dramatically improve ride comfort in any sea-state or wave angle. TRAC’s 3-term control detects vessel motion and instantly adjusts fin stabilizer position to counteract roll.

We don’t just sell the equipment; we also back it up with a complete installation, commissioning and maintenance service via our TRAC factory trained technicians.

In marine stabilizers, speed is the key. You must stop Roll before it starts otherwise you end up fighting the vessel’s momentum as well as the forces of the sea, and that’s a losing battle. The lightning-fast reaction time of the TRAC yacht stabilizer is key to its premium performance.

TRAC Advantages

Dramatic Yacht Stabilizing Performance

Dramatic is the only word that even comes close to describing the performance of an ABT-TRAC marine stabilizer system compared to any first-generation boat stabilizer. Other boat stabilizing products provide some degree of “roll dampening“ but the ABT-TRAC marine stabilizer virtually eliminates roll altogether!

ABT-TRAC Boat Stabilizers Are Fast Acting

Solid state inertial sensors feed TRAC’s control processor with vessel roll and heel angle data in real time. TRAC’s stabilizer fin angle of attack is adjusted over 200 times per second to create roll countering lift the instant it is detected.

A Digitally Designed Yacht Stabilizer

The TRAC stabilizer fin was computer designed from the ground up by a nationally recognized hydrodynamics design team. The Stabilizer fin chord shape was optimized to create maximum lift without cavitation at typical cruising speeds. But to give the TRAC fin the lift needed to provide absolute stabilizing performance, a “winglet“ was designed and added to the tip of the fin. The winglet provides a substantial increase in lift while reducing drag at the same time.

The TRAC Winglet

A traditional boat stabilizer fin loses a measurable amount of lift out at the tip as water on the high-pressure side wraps around the tip to the low-pressure side. The phenomenon also creates what is called a “wing tip vortex“ which is a major component of drag. The TRAC stabilizer fin winglet provides a barrier to high pressure “wraparound“ thus increasing lift and reducing drag at the same time.“

TRAC Stabilizer Easy Touch Screen Access

TRAC Link is an integrated CAN Bus control for TRAC stabilizers, thrusters, and auxiliary hydraulic loads. TRAC Link control allows multiple touch screen panels and thruster control stations to be connected via simple network cables. Thrusters, stabilizers and auxiliary hydraulics can be controlled from the same touch screen. TRAC Link also monitors hydraulic pressure and stabilizer performance. TRAC thrusters can be precisely controlled to manoeuvre the vessel to the dock and hold it there. Dual windlass control is available from the touch screen.

Integrated Hydraulics Drive TRAC Marine Stabilizers

A dedicated Integrated Hydraulics System (ABT•TRAC central hydraulic system) provides hydraulic fluid power to the TRAC stabilizer.

Space Saving Boat Stabilization System

The TRAC Stabilizer fin actuator is designed with a low profile to minimize installation space. The boat Stabilizer’s larger mounting flange makes actuator installation easier and spreads fin loads into the hull over a greater area.

Downloadables:
TRACStar – Zero Speed
TRAC – Product Overview

Stella Sliding Tender Chocks are a high quality, highly functional piece of equipment for carrying your Jet ski or Tender. 

Marine Grade 316 Stainless Steel

Our Dinghy Chocks are built with 316 stainless steel for corrosion resistance. Every piece is machined in-house, and our skilled tradesmen fabricate it all together. These are simple to assemble and make an absolute statement on the back of your yacht.

Sliding

The locking pins are designed to keep the tender chocks in place. To slide the chocks out, pull out the pin on each chock and slot it into one of the pre-drilled holes on the opposite end. Push the jet ski or tender out to water or pull it towards the boat ready to get back underway. The rollers on the chocks make this a very easy task! 

Removable

Free up space for more recreational activities and ensure the swim platform is free of obstructions! When you do not need to use the Tender Chocks, remove the bolts, lift up the chocks and put them in a safe location until you would like to use them again. 

Adjustable

The cork pads can be moved so they are in the perfect position for your Jet ski or Tender. The Tender Chocks are custom-built and can be adjusted to best suit your boat.

Easy Loading of Jet Ski and Tenders

If your Stella Tender Chocks are on a hydraulic swim platform simply lower the platform down into the water, float the Jet ski or tender above the chocks and make sure they are lined up. Raise the platform out of the water, ensuring the jet ski or tender is sitting comfortably in the cork pads. 

If you are using a Davit, hook up your jet ski or tender as you normally would, and lift it above the chocks ensuring the Jet ski or Tender is lined up with the cork pads. Slowly lower into the pads. 

12 months limited Australian warranty

We offer a 12 months limited warranty on our watermakers. This is an Australian warranty, backed up directly by us, the manufacturer. You won’t have to deal with a different country or through a local agent.

Portable Water Softeners for boats

Stella’s Portable Water Softeners are a water filter and softener system for applications on yachts, boats, cars, caravans and homes. The Stellasoftener removes all water hardness (minerals) from your potable water supply and helps to protect your equipment, plumbing and tanks by eliminating calcium build-up. 

We offer three sizes; each needs to be recharged after approx. 7500/10500/17500 (depending on model) litres of water has been through the unit. Each Stellasoftener is fitted with a flow regulator to provide more accuracy for production and recharging. The flow rate of the 7500 is 11LPM, the 10500 is 16 LPM and the 17500 is 25 LPM.

What the kit includes

• Softener housing,
• Filter and recharge housing,
• 1 x 5 micron sediment filter,
• 2x hoses with click fittings,
• Flow regulator,
• Hardness test strips,
• 25 kg bag of water softener salt for Recharging.

Choose your size

Additional accessories to ensure longevity

Your Stellasoftener should be checked regularly using the water hardness test strips to ensure your unit is performing prope if necessary, and recharge your unit. This process can be done in 10-15 minutes, Use water softening salt to recharge. 

 12 months limited Australian warranty

We offer a 12 months limited warranty on our watermakers. This is an Australian warranty, backed up direct by us, the manufacturer. You won’t have to deal with a different country or through a local agent.

Make your own fresh water wherever you drop anchor

When you’re cruising to locations only boats can go for weeks at a time, you need a watermaker that is going to work.

Stella watermakers are reverse osmosis (ro) desalination systems built for the people who prefer to keep it simple on boats. If you put durability and reliability above all else then a Stella Watermaker is the system for you.

We work on a personal, technical advice basis so give us a call on (07) 5665 8071 or press the enquire now button.

Marine Engineering company for 20 years

What sets Stella Watermakers apart from any other is the decade of marine engineering experience that predated the first design concept. After many years of experience operating, servicing, selling, and installing all brands and types of watermakers, the team at Stella knew we could build a machine that required less servicing, was simple to operate, and was guaranteed to work when you needed it to.

Since 2011 Stella has been building the best small desalination systems for both marine and land using only high-quality pumps with great warranty reputations, constructed of 316 stainless steel and duplex, no use of proprietary parts, and no unnecessary electronics.

Stella Watermakers combines simplicity with quality components to create a reliable, easy-to-use system that offers real value for money. Whether you are a seasoned superyacht engineer or cruising yachty our modular watermakers are designed for easy installation, operation, and maintenance.

A detailed explanation of our Gen 3 marine watermaker system is below.

The Generation 3 Stella Watermaker

Gen 3 is a modular watermaker system (separate components, not a large framed box) so they can be fitted wherever there is available space (pictured) and use no electronics, just simple manual control valves.

All Stella Watermakers come standard with

1 x Control Panel, 1 x GP motor and high-pressure pump (unless engine drive, see below), 1 x Davey Low-Pressure Pump, Filmtec membranes (1,2 or 3) and housings, 1 x 20 micron and 5-micron pleated filters, 2 x seawater filter housings, 1 x carbon filter, and housing, standard high-pressure hoses and a TDS reader (Everything pictured).

* Autoflush is an optional extra, not everyone wants it though it is the only piece of automation we would recommend here.

Stella Manufactures AC or Engine Driven Watermakers

Electric 240VAC

The watermakers for larger powerboats, yachts, and catamarans with a suitable sized AC Genset. Always the first option, easy installation and makes lots of water fast. You will need a minimum 3.5kva (continuously rated) Genset to run our 240VAC electric unit. Output is 70, 140, or 210 litres per hour of water using 1, 2, or 3 standard membranes. Power usage (LP and HP pump) is approx. 12 amps when running (without start-up load). For more info download the 240VAC manual at the bottom of this page.

Engine Driven

For all marine vessels without a Genset, but with an inboard engine. It’s a very efficient and reliable way of making plenty of water very quickly. You will need a suitable engine with room to fit an engine bracket and pulley system. We have some standard brackets available or custom fabrication is required. Output is 80, 160, or 240 litres per hour of water using 1, 2, or 3 standard membranes. Power usage is approx. 2HP draw from the engine. For more info download the engine drive manual at the bottom of this page.

Stella Options

Auto Flush

Makes it easier to maintain your watermaker if you are not making water or on the boat every week to perform a manual flush. All watermaker membranes need to be freshwater flushed after each use and then every 7 days if not pickled for storage to avoid damage to the membrane. Our auto-flush system includes a box with a dual timer and solenoid valve to flush your system with water from your boat’s tank for a few minutes every 7 days.

Spares Kit

All the consumables you need for 6-12 months cruising (depending on usage). Includes: 3x 20-micron seawater filters, 3x 5-micron seawater filters, 1x 5-micron charcoal (carbon) filter, 1x 500g pickling solution (for membrane storage), 1x 1lt HP pump oil.

Stella Advantages

Simple manual operation, no electronics

We have made it simple to use. You don’t have to study the manual to be able to operate our watermakers. We have removed the electronic automation which usually makes watermakers difficult to use, unreliable, and even harder to fix. Just two valves on the control panel and a knob to wind up the pressure. Comes with a laminated “Quick Start-Up Sheet“ with step-by-step instructions so anyone can make water quickly.

Super performance and reliability

Our watermakers make a lot of water fast! 80-240 liters per hour with our AC and engine-driven units. When it comes to making water ”the quicker the better” so you don’t have to do it every day or for long periods. With simplicity and quality components with a lack of electronics comes unequaled reliability, critical when cruising.

Quality 316 stainless steel components

From our high-pressure pump to our membrane housing end caps and fittings, all-metal components are 316-grade stainless steel (or Duplex), designed for a harsh marine environment. We appreciate quality and have sourced the best components from around the world for our watermakers. This combination of quality components and a simple design creates a very reliable, easy-to-use system.

Low maintenance and running costs

A simpler, better-engineered watermaker with fewer components means less maintenance is required. Running costs are minimal, and will depend on how often it’s used and how well it’s maintained. Consumables such as membranes, filters, pickling solution, and pump oil are all standard items available from us or worldwide.

Modular design for easy installation

Gen 3 Watermakers are modular (separate components not a large framed box) so can be fitted wherever there is available space. The Control Panel can be mounted with other components or remotely in a bathroom cabinet or cockpit locker.

70-210 litres of water per hour (expandable)

Our AC and engine-driven units make lots of water very quickly. Our standard high-pressure pumps will run up to 3 membranes, so if your water requirements change you can always just add another membrane to increase water production.

No high maintenance energy recovery pumps

We don’t use complicated energy recovery pumps with lots of o-rings and poppet valves that create more maintenance. We use industry-standard 316 stainless steel triplex high-pressure pumps with solid ceramic plungers, designed specifically for marine desalination. Parts and service for these pumps are available worldwide.

No cracking plastic membrane end plugs

We don’t use plastic membrane housing end caps; they have a habit of cracking causing dangerous high-pressure leaks. We use quality Duplex 2205 stainless steel end caps for high strength and corrosion resistance.

High-Quality High-pressure hoses

We don’t use cheap and nasty high-pressure hoses; they chafe easily from pump or engine vibration and can split or burst causing injury and damage. We use the highest quality hoses we can find with Quality 316 Stainless fittings. The hoses are protected with an anti-wear wrap to help protect and prolong the life of the hoses.

No proprietary components

 We use industry-standard components that you can easily find worldwide. If you are in a remote area we can ship parts fast if required or help you source them locally.

Best after sales service and backup

We are not just a sales company; we design and manufacture our watermakers so can offer the best service and backup. We have a marine engineering division who services our watermakers and can help with all troubleshooting queries.

Installation and servicing if required

We don’t just sell the equipment, we also offer a complete installation, commissioning and maintenance service via our marine engineering division if required. Our 30-page Installation & Operation Manual supplied with each watermaker provides simple step by step instructions with diagrams of all components making installation easy for the DIY boat owner, boat builder or contracted installer. The manual includes an easy-to-understand system flow diagram and detailed procedures for operation and maintenance of your watermaker.

24 months limited Australian warranty

We offer a 24-month limited warranty on our watermakers. This is an Australian warranty, backed up direct by us the manufacturer. You won’t have to deal with a different country or through a local agent.

Proudly designed and manufactured in Australia

Not only is our water maker the best value for money system available, it is also Australian-made and comes with an Australian warranty and back-up. Support your local marine industry and buy an Australian-made watermaker.

Real Value for Money

The combination of a simple reliable design, quality components and high-water output make Stella Watermakers real value for money and include free Australia wide (metro) delivery.

The manual is available for you to download as well as a brochure for keepsake. Our team are experts in desalination and can generally answer any question over the phone – Call anytime.

To enquire through email either email us at info@stellamarine.com.au or press the red ‘enquire now’ button.

Trade and export enquiries welcome!

Downloadables:

Manual Generation 3 – Engine Drive CE
Manual Generation 3 – 240VAC CE

Small-scale desalination units for Bore, Brackish or Seawater

Turn Salty/saline water into the world’s best fresh water with a Land-Based Stella Watermaker. Built off the back of the Gen 3, Stella’s Land-Based Stella Watermakers take all the best bits of a Gen 3 system and put it into a framed kit ready for plug and play use. Land-Based systems are small-scale desalination plants that produce clear fresh water for livestock, crop spraying, horticulture, and domestic uses. 

We supply our land-based desalination units to farmers, business owners, and rural communities across Australia and throughout the South Pacific. The watermakers make 240+ lph. if you need a system more than 240 lph then contact our staff by pressing the red \\”enquire now\\” button, we will design a system for you.

Our framed, portable systems are the solution for your freshwater needs.

The Land-Based Stella Watermaker System

Is a manual system that uses only heavy-duty parts, making it extremely durable and able to withstand the harshest of environments. Every Land-Based Stella Watermaker comes pre-plumbed ready for Plug & Play use. Simply connect the \\”water source inlet\\” and \\”to tank\\” hoses and plug in the pumps to begin making water. Stella Watermakers are an incredibly system designed to help Aussie farmers.

Pre Filters 

We use 10/4 inch pleated filters for our Land-Based and Aquarius systems. This is so the pre-filters last longer and doesn’t need to be changed as regularly as the 10/2.5 inch. 

Membranes

Do you need seawater or brackish water membranes? Speak to one of our staff members who will help you design your system and ensure you are set up with the right membranes. 

Stella Options

Auto Flush

Makes it easier to maintain your watermaker. Optional automatic freshwater flushing system which includes a box with dual timer and solenoid valve to flush your system with water from your fresh water tank for a few minutes every 7 days. All watermaker membranes need to be freshwater flushed after each use and then every 7 days if not pickled for storage, to avoid damage to the membrane.

Jumbo Spares Kit

All the consumables you need for 6-12 months usage (depending on usage). Includes: 3x 10/4 inch 20-micron seawater filters, 3x 10/4 inch 05-micron seawater filters, 1x 10/2.5 inch 05-micron charcoal (carbon) filter, 1x 500g pickling solution (for membrane storage), 1x 1lt HP pump oil.

Stella Advantages

Simple manual operation, no electronics

We have made it simple to use. You don’t have to study the manual to be able to operate our watermakers. We have removed the electronic automation which makes watermakers difficult to use, unreliable and even harder to fix. Just two valves on the control panel and a knob to wind up the pressure. Comes with a laminated ”Quick Start-Up Sheet” with step-by-step instructions so anyone can make water quickly.

Super performance and reliability

Our watermakers make a lot of water fast! 80-240 litres per hour with our AC units. When it comes to making water ”the quicker the better” so you don’t have to do it every day or for long periods. With the simple, quality components and lack of electronics comes unequalled reliability, critical when in water-scarce areas.

Quality 316 stainless steel components

From our high-pressure pump to our membrane housing end caps and fittings, all-metal components are 316-grade stainless steel (or Duplex), designed for a harsh marine environment. We appreciate quality and have sourced the best components from around the world for our watermakers. 

Low maintenance and running costs

A simpler, better-engineered watermaker with fewer components means less maintenance is required. Running costs are minimal but will depend on how often it’s used and how well it’s maintained. Consumables such as membranes, filters, pickling solutions, and pump oil are all standard items available from us or worldwide.

Plug and Play design for easy installation

All Land-Based Stella Watermakers are delivered as a framed kit with all pre-plumbing connected. This means the systems can be fitted wherever there is available space, just hook up the hoses to the water source and tank, plug in the electrical cords for the pump and turn it on. 

No flashing lights or failing circuit boards

Fully automated watermakers use a multitude of electronics including a microprocessor, circuit boards, solenoid valves, timers, relays, pressure switches, led screens, flashing lights and salinity probes. Great when they work, but the cost goes up and reliability goes down! Any experienced cruiser knows that the simpler the equipment the better. Even seasoned superyacht engineers prefer our watermakers to others with all the ”bells and whistles”.

No high maintenance energy recovery pumps

We don’t use complicated energy recovery pumps with lots of O-rings and poppet valves that create more maintenance. We use industry-standard 316 stainless steel triplex high-pressure pumps with solid ceramic plungers, designed specifically for marine desalination. Parts and services for these pumps are available worldwide.

No cracking plastic membrane end plugs

We don’t use plastic membrane housing end caps; they have a habit of cracking causing dangerous high-pressure leaks. We use quality Duplex 2205 stainless steel end caps for high strength and corrosion resistance.

High-Quality High-pressure hoses

We don’t use cheap and nasty high-pressure hoses; they chafe easily from pump or engine vibration and can split or burst to cause injury and damage. We use the highest quality hoses we can find with Quality 316 Stainless fittings. The hoses are protected with an anti-wear wrap to help protect and prolong the life of the hoses.

No proprietary components

We don’t use special manufactured components such as filters or membranes that force you to buy replacements from us and cost ”an arm and a leg”. We use industry standard components that you can easily find worldwide. If you are in a remote area, we can ship parts fast if required or help you find them locally.

Best after-sales service and backup

We are not just a sales company; we design and manufacture our watermakers so can offer the best service and backup. We have a marine engineering division that services all brands of watermakers and can help with all troubleshooting queries.

Installation and servicing if required

Our 30-page Installation & Operation Manual supplied with each watermaker provides simple step by step instructions with diagrams of all components making installation easy. The manual includes an easy-to-understand system flow diagram and detailed procedures for operation and maintenance of your watermaker. 

24 months limited Australian warranty

We offer a 24-month limited warranty on our watermakers. This is an Australian warranty, backed up direct by us the manufacturer. You won’t have to deal with a different country or through a local agent.

Proudly designed and manufactured in Australia

Not only is our watermaker the best value for money system available, it is also Australian made and comes with an Australian warranty and back-up. Support your local marine industry and buy an Australian made watermaker.

Real Value for Money

The combination of a simple reliable design, quality components and high-water output make Stella Watermakers real value for money.

Trade and export enquiries welcome!

For Stella Watermaker specifications and dimensions please enquire.

Aquarius is the world’s simplest fully automatic watermaker, unrivalled in its simplicity, reliability and usability. We have worked hard to not over complicate this system. 

Aquarius is the perfect solution if you are looking for a watermaker that will take care of itself. Modular or compact, Aquarius runs its own start up and shut off sequence, has high pressure and low-pressure factory pre-set shutdown safety settings, it auto-flushes like clockwork, and all you need to do is press start and stop on the remote installed in your cabin. 

Engineered to perform, Aquarius does not need extra operator attention. Once past its commissioning stage, your fresh-water needs will be one less thing to worry about.

The Stella Watermakers Concept

Stella Watermakers are the result of many years of experience operating, servicing, selling and installing all brands and types of watermakers (reverse osmosis desalination plants). Proudly designed and manufactured in Australia, Stella Watermakers combine simplicity with quality components to create a reliable, easy to use system that offers real value for money. Whether you are a seasoned superyacht engineer or cruising yachtie our modular watermakers are designed for easy installation, operation and maintenance.

Stella Advantages

We’ve made the best possible fully-automatic watermaker we can.

Fully automated watermakers use a multitude of electronics including a microprocessor, circuit boards, solenoid valves, timers, relays, pressure switches, led screens, flashing lights and salinity probes. We believe we have engineered our control panel and electrical box to give you the best possible outcome. A watermaker that takes care of itself, besides the regular maintenance required. 

Simple automation 

We have made it simple to use. Install the remote control anywhere in the cabin and you have all you need to make water with the push of a button. 

Press start on the remote and Aquarius will run its own start-up sequence and begin making water shortly. Once the tank is full Press Stop on the remote and Aquarius will run its own shut-down sequence, including a 3-minute auto-flush. Finally once the auto-flush is complete, Aquarius will automatically switch itself into standby mode – awaiting the next time you press Start. 

With simplicity and quality comes unequalled reliability, critical when cruising.

Super performance and reliability

Our watermakers make a lot of water fast! 80-240 litres per hour with our AC and engine driven units. When it comes to making water ”the quicker the better” so you don’t have to do it every day or for long periods. 

Quality 316 stainless steel components

From our high pressure pump to our membrane housing end caps and fittings, all metal components are 316 grade stainless steel (or Duplex), designed for the harshest marine conditions. We understand the importance of quality and have sourced the best components from around the world to ensure our watermakers are of the best standard. This combination of quality components and a simple design creates a very reliable, easy to use system.

Low maintenance and running costs

A simpler, better engineered watermaker with less components means less maintenance is required. Running costs are minimal, but it will ultimately depend on how often it’s used and how well it’s maintained. Consumables such as membranes, filters, pickling solution and pump oil are all standard items available directly from us at Stella or your local marine chandlery.

Modular design for easy installation

Aquarius is modular (separate components not a large framed box) so can be fitted wherever there is available space. The Control Panel can be mounted with other components or remotely in a bathroom cabinet or cockpit locker.

No high maintenance energy recovery pumps

We use industry standard 316 stainless steel triplex high pressure pumps with solid ceramic plungers, designed specifically for marine desalination. Parts and service for these pumps are available worldwide.

No cracking plastic membrane end plugs

We use quality Duplex 2205 stainless steel end caps for high strength and corrosion resistance. 

High Quality High pressure hoses

We use the highest quality hoses we can find with Quality 316 Stainless fittings. The hoses are protected with a anti-wear wrap to help protect and prolong the life of the hoses.

No proprietary components

We use industry standard components that you can easily find worldwide. If you are in a remote area we can ship parts fast if required or help you source them locally.

Stella Options

All the consumables you need for 6-12 months cruising (depending on usage). Includes: 3x 20 micron seawater filters, 3x 5 micron seawater filters, 1x 5 micron charcoal (carbon) filter, 1x 500g pickling solution (for membrane storage), 1x 1lt HP pump oil.

Best after sales service and backup

We are not just a sales company, we design and manufacture our watermakers in-house, so we  can offer the best service and backup. We have a marine engineering division who services all brands of watermakers and can help with all troubleshooting queries.

Installation and servicing if required

We don’t just sell the equipment, we also offer a complete installation, commissioning and maintenance service via our marine engineering division if required. Our Installation & Operation Manual supplied with each watermaker provides simple step by step instructions with diagrams of all components making installation easy for the DIY boat owner, boat builder or contracted installer. The manual includes an easy to understand system flow diagram and detailed procedures for operation and maintenance of your watermaker. 

24 months limited Australian warranty

We offer a 24 months limited warranty on our watermakers. This is an Australian warranty, backed up direct by us, the manufacturer. You won’t have to deal with a different country or through a local agent.

Proudly designed and manufactured in Australia

Not only is our watermaker the best value for money system available, it is also Australian made and comes with an Australian warranty and back-up. Support your local marine industry and buy an Australian made watermaker.

Real Value for Money

The combination of a simple reliable design, quality components and high water output make Stella Watermakers real value for money.

Trade and export enquiries welcome!

For Stella Watermaker specifications and dimensions please enquire with our team today.

Please include your best contact number so we can call you back to discuss.

The Rutland 1200 is the new generation of turbine designed for users seeking higher generating capacity on board yachts and in offgrid locations. The Rutland 1200 elegantly combines a number of high tech features focused on quiet operation, low wind speed performance and high power delivery up to 500W.

Design Features

• Unique Tri-namic Profile Blades The most advanced Marlec designed Tri-namic Blade brings together low wind speed start up with high wind speed power performance and almost silent running across all wind speeds.
• 3 Phase AC power delivered from the turbine to the controller minimises voltage drop on long cable runs
• The low friction generator responds rapidly to wind speed changes and its inertia drives the turbine on between gusts to capture more energy
• Power optimising Maximum Power Point Tracking (MPPT) boosts the turbine’s output
• Marine grade stainless steel and aluminium are combined with modern, durable but lightweight materials to give a high quality build and finish.

Rutland Advantages

Rutland’s low wind speed start up is unrivalled. The highly efficient blade and generator designs deliver charge into your batteries long before many other turbines are picking up. Overall that’s more power to you!

Marlec are innovators, leading the way in their industry on aerodynamic, electronics and low friction generator designs to deliver modern, durable wind turbines that have continued to stand the test of time.

They keep it simple and user friendly for our tens of thousands of users worldwide. Eg the blades have a positive one-way-only fit so there’s no need for the user to align with other components.

Quietly – their fully integrated product designs result in quiet operation so you can liveaboard without disturbance from noisy blades.

Reliably – with over 100,000 units sold worldwide, Rutland turbines have been proven time and again on land and sea. The UK based factory is manufactured under ISO9002 operating standards and their testing parameters are rigorous.

Effortlessly – just a gentle breeze is all it takes to start delivering charge into your batteries.  The Rutland 1200 highly efficient blades and low inertia generator capture the free and abundant energy in the wind.

Environmentally Friendly – be at one with the sea and use the natural resources of the wind and sun to fulfil your energy needs without costing the earth.

Controller Specifications:

• Hybrid control to combine Rutland 1200 wind turbine with up to 20A of solar panels
• Dual charging capability to 2 separate battery banks
• MPPT on both wind turbine and solar panel inputs to maximise both energy sources.  Enables connection of high voltage solar panels.
• Pulse Width Modulation charge control for multi-stage charging ensures fully charged and maintained batteries.
• Automatic turbine speed reduction as batteries reach capacity, resumes as batteries deplete.
• Manual shutdown switches for wind and solar inputs
• LED charge and battery condition   indicators as standard.
• Remote digital display optional. Connect with RJ232

Getting Your Rutland Up and Running

The Rutland 1200 includes the controller needed for battery charging up to 2 separate battery banks.  It is a purpose designed wind and solar energy hybrid controller accepting inputs from the Rutland 1200 and up to 20A of solar panels.

Select the model required, 12V or 24V. The regulator should be located within a 1.5m cable run of the battery bank.

An optional remote digital display is available.

Marine Mounting Pole – a Rutland Marine Mounting Pole and separately supplied Stays Kit give a professional finish to your installation OR make your own to suit your own based on tube specified at 41mm internal and 48mm external diameters.

Cables & Connectors – select between 2.5mm and 4mm 3 core cable. Permanent battery connections are recommended.

Batteries – deep cycle gel or AGM types are recommended with renewable energy systems. A good quality range is available from Marlec.

Downloadables:
Rutland 1200 Brochure
Rutland 1200 Manual -D Part 1
Rutland 1200 Manual -D.1 Part 2

The Rutland 914i was developed following the long success of the 913 model. Its 30% increased generating capacity, from the same diameter turbine, is achieved through advanced maximum power point tracking (MPPT) electronics, delivering even more energy from the wind. Ideal for liveaboard and weekend yachting boats from 10 meters.

The Rutland 914i punches well above its size for power, rivalling the claimed outputs of larger turbines, owing to its built-in MPPT technology. This continuously matches the turbine speed and generator to their optimum performance to deliver more ampere hours into your battery…and a by-product of this optimised efficiency is a virtually silent wind turbine!

Materials

Marlec have innovated their field by introducing light weight but robust high-density nylon and glass reinforced materials that are UV stable alongside marine grade aluminium, stainless steel, sealed for life bearings and other carefully selected and precision worked materials in the UK factory.

Why Rutland?

Rutland’s low wind speed start up is unrivalled. The highly efficient blade and generator designs deliver charge into your batteries long before many other turbines are picking up. Overall that’s more power to you!

Marlec are innovators, leading the way in their industry on aerodynamic, electronics and low friction generator designs to deliver modern, durable wind turbines that have continued to stand the test of time.

They keep it simple and user friendly for our tens of thousands of users worldwide. Eg the blades have a positive one-way-only fit so there’s no need for the user to align with other components.

Quietly – their fully integrated product designs result in quiet operation so you can liveaboard without disturbance from noisy blades.

Reliably – with over 100,000 units sold worldwide, Rutland turbines have been proven time and again on land and sea. The UK based factory is manufactured under ISO9002 operating standards and their testing parameters are rigorous.

Effortlessly – just a gentle breeze is all it takes to start delivering charge into your batteries.  The Rutland 1200 highly efficient blades and low inertia generator capture the free and abundant energy in the wind.

Environmentally Friendly – be at one with the sea and use the natural resources of the wind and sun to fulfil your energy needs without costing the earth.

Getting Your Rutland Up and Running

Choose the right Rutland Windcharger for you and then select: 

A Rutland Marine Mounting Pole and separately supplied Stays Kit give a professional nish to your installation OR make your \\\\ own to suit using the tube sizes specified:

Rutland 914i – 41mm internal diameter, maximum external 48mm

Rutland 504 – 31.7mm internal diameter, maximum external 38mm

Charge Regulator

Choose one of the latest technology PWM (pulse width modulation) regulators available for single or dual battery charging. Both types undertake multistage charging and include temperature compensation to maximise the battery capacity. As the batteries achieve full charge these regulators automatically and progressively brake the blades minimising unnecessary wear on the wind turbine. An input position for solar panels up to maximum capacity of 160W (@25°C) is included. Shutdown switch to isolate wind and solar charging from the battery is built in. The regulator should be located within a 1.5m cable run of the battery ban.

Downloadables:
Rutland Marine Brochure
Rutland 914i Manual C

The Rutland 504 model’s safety turbine makes it ideal for trickle charging on board where space is at a premium. Weekend yachts up to 10m and mobile users such as caravanners will appreciate its compact size and weight for ease of handling and portability. Typically suited for batteries up to 150Ah capacity.

Materials

Marlec have innovated their field by introducing light weight but robust high-density nylon and glass reinforced materials that are UV stable alongside marine grade aluminium, stainless steel, sealed for life bearings and other carefully selected and precision worked materials in the UK factory.

Why Rutland?

Rutland’s low wind speed start up is unrivalled. The highly efficient blade and generator designs deliver charge into your batteries long before many other turbines are picking up. Overall that’s more power to you!

Marlec are innovators, leading the way in their industry on aerodynamic, electronics and low friction generator designs to deliver modern, durable wind turbines that have continued to stand the test of time.

They keep it simple and user friendly for our tens of thousands of users worldwide. Eg the blades have a positive one-way-only fit so there’s no need for the user to align with other components.

Quietly – their fully integrated product designs result in quiet operation so you can liveaboard without disturbance from noisy blades.

Reliably – with over 100,000 units sold worldwide, Rutland turbines have been proven time and again on land and sea. The UK based factory is manufactured under ISO9002 operating standards and their testing parameters are rigorous.

Effortlessly – just a gentle breeze is all it takes to start delivering charge into your batteries.  The Rutland 1200 highly efficient blades and low inertia generator capture the free and abundant energy in the wind.

Environmentally Friendly – be at one with the sea and use the natural resources of the wind and sun to fulfil your energy needs without costing the earth.

Getting Your Rutland Up and Running

Choose the right Rutland Windcharger for you and then select: 

A Rutland Marine Mounting Pole and separately supplied Stays Kit give a professional nish to your installation OR make your \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ own to suit using the tube sizes specified:

Rutland 914i – 41mm internal diameter, maximum external 48mm

Rutland 504 – 31.7mm internal diameter, maximum external 38mm

Charge Regulator

Choose one of the latest technology PWM (pulse width modulation) regulators available for single or dual battery charging. Both types undertake multistage charging and include temperature compensation to maximise the battery capacity. As the batteries achieve full charge these regulators automatically and progressively brake the blades minimising unnecessary wear on the wind turbine. An input position for solar panels up to maximum capacity of 160W (@25°C) is included. Shutdown switch to isolate wind and solar charging from the battery is built in. The regulator should be located within a 1.5m cable run of the battery ban.

Downloadables:
Rutland Charge Controllers Stella
Rutland 504 – efurl Manual C
Rutland Marine Brochure